In computer science, a Fibonacci heap is a heap data structure consisting of a collection of trees. It has a better amortized running time than a binomial heap. Fibonacci heaps were developed by Michael L. Fredman and Robert E. Tarjan in 1984 and first published in a scientific journal in 1987. The name of Fibonacci heap comes from Fibonacci numbers which are used in the running time analysis.
Find-minimum is O(1) amortized time.[1] Operations insert, decrease key, and merge (union) work in constant amortized time.[2] Operations delete and delete minimum work in O(log n) amortized time.[2] This means that starting from an empty data structure, any sequence of a operations from the first group and b operations from the second group would take O(a + b log n) time. In a binomial heap such a sequence of operations would take O((a + b) log (n)) time. A Fibonacci heap is thus better than a binomial heap when b is asymptotically smaller than a.
Using Fibonacci heaps for priority queues improves the asymptotic running time of important algorithms, such as Dijkstra's algorithm for computing the shortest path between two nodes in a graph.
Structure
Figure 1. Example of a Fibonacci heap. It has three trees of degrees 0, 1 and 3. Three vertices are marked (shown in blue). Therefore the potential of the heap is 9.
A Fibonacci heap is a collection of trees satisfying the minimum-heap property, that is, the key of a child is always greater than or equal to the key of the parent. This implies that the minimum key is always at the root of one of the trees. Compared with binomial heaps, the structure of a Fibonacci heap is more flexible. The trees do not have a prescribed shape and in the extreme case the heap can have every element in a separate tree. This flexibility allows some operations to be executed in a "lazy" manner, postponing the work for later operations. For example merging heaps is done simply by concatenating the two lists of trees, and operation decrease key sometimes cuts a node from its parent and forms a new tree.
However at some point some order needs to be introduced to the heap to achieve the desired running time. In particular, degrees of nodes (here degree means the number of children) are kept quite low: every node has degree at most O(log n) and the size of a subtree rooted in a node of degree k is at least Fk + 2, where Fk is the kth Fibonacci number. This is achieved by the rule that we can cut at most one child of each non-root node. When a second child is cut, the node itself needs to be cut from its parent and becomes the root of a new tree (see Proof of degree bounds, below). The number of trees is decreased in the operation delete minimum, where trees are linked together.
As a result of a relaxed structure, some operations can take a long time while others are done very quickly. For the amortized running time analysis we use the potential method, in that we pretend that very fast operations take a little bit longer than they actually do. This additional time is then later combined and subtracted from the actual running time of slow operations. The amount of time saved for later use is measured at any given moment by a potential function. The potential of a Fibonacci heap is given by
- Potential = t + 2m
where t is the number of trees in the Fibonacci heap, and m is the number of marked nodes. A node is marked if at least one of its children was cut since this node was made a child of another node (all roots are unmarked).
Thus, the root of each tree in a heap has one unit of time stored. This unit of time can be used later to link this tree with another tree at amortized time 0. Also, each marked node has two units of time stored. One can be used to cut the node from its parent. If this happens, the node becomes a root and the second unit of time will remain stored in it as in any other root.
Implementation of operations
To allow fast deletion and concatenation, the roots of all trees are linked using a circular, doubly linked list. The children of each node are also linked using such a list. For each node, we maintain its number of children and whether the node is marked. Moreover we maintain a pointer to the root containing the minimum key.
Operation find minimum is now trivial because we keep the pointer to the node containing it. It does not change the potential of the heap, therefore both actual and amortized cost is constant. As mentioned above, merge is implemented simply by concatenating the lists of tree roots of the two heaps. This can be done in constant time and the potential does not change, leading again to constant amortized time.
Operation insert works by creating a new heap with one element and doing merge. This takes constant time, and the potential increases by one, because the number of trees increases. The amortized cost is thus still constant.
Fibonacci heap from Figure 1 after first phase of extract minimum. Node with key 1 (the minimum) was deleted and its children were added as separate trees.
Operation extract minimum (same as delete minimum) operates in three phases. First we take the root containing the minimum element and remove it. Its children will become roots of new trees. If the number of children was d, it takes time O(d) to process all new roots and the potential increases by d−1. Therefore the amortized running time of this phase is O(d) = O(log n).
Fibonacci heap from Figure 1 after extract minimum is completed. First, nodes 3 and 6 are linked together. Then the result is linked with tree rooted at node 2. Finally, the new minimum is found.
However to complete the extract minimum operation, we need to update the pointer to the root with minimum key. Unfortunately there may be up to n roots we need to check. In the second phase we therefore decrease the number of roots by successively linking together roots of the same degree. When two roots u and v have the same degree, we make one of them a child of the other so that the one with the smaller key remains the root. Its degree will increase by one. This is repeated until every root has a different degree. To find trees of the same degree efficiently we use an array of length O(log n) in which we keep a pointer to one root of each degree. When a second root is found of the same degree, the two are linked and the array is updated. The actual running time is O(log n + m) where m is the number of roots at the beginning of the second phase. At the end we will have at most O(log n) roots (because each has a different degree). Therefore the difference in the potential function from before this phase to after it is: O(log n) − m, and the amortized running time is then at most O(log n + m) + O(log n) − m = O(log n). Since we can scale up the units of potential stored at insertion in each node by the constant factor in the O(m) part of the actual cost for this phase.
In the third phase we check each of the remaining roots and find the minimum. This takes O(log n) time and the potential does not change. The overall amortized running time of extract minimum is therefore O(log n).
Fibonacci heap from Figure 1 after decreasing key of node 9 to 0. This node as well as its two marked ancestors are cut from the tree rooted at 1 and placed as new roots.
Operation decrease key will take the node, decrease the key and if the heap property becomes violated (the new key is smaller than the key of the parent), the node is cut from its parent. If the parent is not a root, it is marked. If it has been marked already, it is cut as well and its parent is marked. We continue upwards until we reach either the root or an unmarked node. In the process we create some number, say k, of new trees. Each of these new trees except possibly the first one was marked originally but as a root it will become unmarked. One node can become marked. Therefore the potential decreases by at least k − 2. The actual time to perform the cutting was O(k), therefore the amortized running time is constant.
Finally, operation delete can be implemented simply by decreasing the key of the element to be deleted to minus infinity, thus turning it into the minimum of the whole heap. Then we call extract minimum to remove it. The amortized running time of this operation is O(log n).
Proof of degree bounds
The amortized performance of a Fibonacci heap depends on the degree (number of children) of any tree root being O(log n), where n is the size of the heap. Here we show that the size of the (sub)tree rooted at any node x of degree d in the heap must have size at least Fd+2, where Fk is the kth Fibonacci number. The degree bound follows from this and the fact (easily proved by induction) that 
for all integers 
, where 
. (We then have 
, and taking the log to base 
of both sides gives 
as required.)
Consider any node x somewhere in the heap (x need not be the root of one of the main trees). Define size(x) to be the size of the tree rooted at x (the number of descendants of x, including x itself). We prove by induction on the height of x (the length of a longest simple path from x to a descendant leaf), that size(x) ≥ Fd+2, where d is the degree of x.
Base case: If x has height 0, then d = 0, and size(x) = 1 = F2.
Inductive case: Suppose x has positive height and degree d>0. Let y1, y2, ..., yd be the children of x, indexed in order of the times they were most recently made children of x (y1 being the earliest and yd the latest), and let c1, c2, ..., cd be their respective degrees. We claim that ci ≥ i-2 for each i with 2≤i≤d: Just before yi was made a child of x, y1,...,yi−1 were already children of x, and so x had degree at least i−1 at that time. Since trees are combined only when the degrees of their roots are equal, it must have been that yi also had degree at least i-1 at the time it became a child of x. From that time to the present, yi can only have lost at most one child (as guaranteed by the marking process), and so its current degree ci is at least i−2. This proves the claim.
Since the heights of all the yi are strictly less than that of x, we can apply the inductive hypothesis to them to get size(yi) ≥ Fci+2 ≥ F(i−2)+2 = Fi. The nodes x and y1 each contribute at least 1 to size(x), and so we have
A routine induction proves that 
for any , which gives the desired lower bound on size(x).
Worst case
Although the total running time of a sequence of operations starting with an empty structure is bounded by the bounds given above, some (very few) operations in the sequence can take very long to complete (in particular delete and delete minimum have linear running time in the worst case). For this reason Fibonacci heaps and other amortized data structures may not be appropriate for real-time systems. It is possible to create a data structure which has the same worst case performance as the Fibonacci heap has amortized performance.[3] However the resulting structure is very complicated, so it is not useful in most practical cases.
Summary of running times
| Common Operations | Effect | Unsorted Linked List | Sorted Linked List | Self-balancing binary search tree | Binary heap | Binomial heap | Fibonacci heap | Brodal queue[3] | Pairing heap |
|---|
| insert(data,key) | Adds data to the queue, tagged with key | O(1) | O(n) | O(log n) | O(log n) | O(log n) | O(1) | O(1) | O(1)[2] |
| findMin() -> key,data | Returns key,data corresponding to min-value key | O(n) | O(1) | O(log n) or O(1) (**) | O(1) | O(log n)[4] | O(1)[1] | O(1) | O(1)[2] |
| deleteMin() | Deletes data corresponding to min-value key | O(n) | O(1) | O(log n) | O(log n) | O(log n) | O(log n)* | O(log n) | O(log n)*[2] |
| delete(node) | Deletes data corresponding to given key, given a pointer to the node being deleted | O(1) | O(1) | O(log n) | O(log n) | O(log n) | O(log n)* | O(log n) | O(log n)*[2] |
| decreaseKey(node) | Decreases the key of a node, given a pointer to the node being modified | O(1) | O(n) | O(log n) | O(log n) | O(log n) | O(1)* | O(1) | Unknown but bounded:  *[2] |
| merge(heap1,heap2) -> heap3 | Merges two heaps into a third | O(1) | O(m + n) | O(m log(n+m)) | O(m + n) | O(log n)*** | O(1) | O(1) | O(1)[2] |
(*)Amortized time
(**)With trivial modification to store an additional pointer to the minimum element
(***)Where n is the size of the larger heap
References
- ^ a b Thomas H. Cormen, Charles E. Leiserson, Ronald L. Rivest, and Clifford Stein. Introduction to Algorithms, Second Edition. MIT Press and McGraw-Hill, 2001. ISBN 0-262-03293-7. Chapter 20: Fibonacci Heaps, pp.476–497. Third edition p518.
- ^ a b c d e f g h Fredman, Michael Lawrence; Tarjan, Robert E. (1987). "Fibonacci heaps and their uses in improved network optimization algorithms" (PDF). Journal of the Association for Computing Machinery 34 (3): 596–615. doi:10.1145/28869.28874.
- ^ a b Gerth Stølting Brodal (1996), "Worst-Case Efficient Priority Queues", Proc. 7th ACM-SIAM Symposium on Discrete Algorithms (Society for Industrial and Applied Mathematics): 52–58, doi:10.1145/313852.313883, ISBN 0-89871-366-8, CiteSeerX: 10.1.1.43.8133
- ^ Cormen, Thomas H.; Leiserson, Charles E., Rivest, Ronald L. (1990). Introduction to Algorithms (1st ed.). MIT Press and McGraw-Hill. ISBN 0-262-03141-8.
External links
