Informatics & Computer    
   
Table of contents
(Prev) National Industrial Security P ...National Institutes of Health (Next)

National Institute of Standards and Technology

National Institute of Standards and Technology
NIST logo.svg
Agency overview
HeadquartersGaithersburg, Maryland, United States
Annual budget$1.1 billion (2011)
Agency executiveDr. Patrick D. Gallagher, Under Secretary of Commerce for Standards and Technology
Website
National Institute of Standards and Technology

The National Institute of Standards and Technology (NIST) — known between 1901 and 1988 as the National Bureau of Standards (NBS) — is a measurement standards laboratory, otherwise known as a National Metrological Institute (NMI), which is a non-regulatory agency of the United States Department of Commerce. The institute's official mission is to:[1]

Promote U.S. innovation and industrial competitiveness by advancing measurement science, standards, and technology in ways that enhance economic security and improve our quality of life.

NIST had an operating budget for fiscal year 2007 (October 1, 2006-September 30, 2007) of about $843.3 million. NIST's 2009 budget was $992 million, but it also received $610 million as part of the American Recovery and Reinvestment Act.[2] NIST employs about 2,900 scientists, engineers, technicians, and support and administrative personnel. About 1,800 NIST associates (guest researchers and engineers from American companies and foreign nations) complement the staff. In addition, NIST partners with 1,400 manufacturing specialists and staff at nearly 350 affiliated centers around the country. NIST publishes the Handbook 44 that provides the "Specifications, tolerances, and other technical requirements for weighing and measuring devices".

Contents

History

Initial mandate

In 1821 John Quincy Adams stated, "Weights and measures may be ranked among the necessities of life to every individual of human society",[3] but this had long been understood. The Articles of Confederation, ratified by the colonies in 1781, contained the clause, "The United States in Congress assembled shall also have the sole and exclusive right and power of regulating the alloy and value of coin struck by their own authority, or by that of the respective states—fixing the standards of weights and measures throughout the United States— ....". Article 1, section 8, of the Constitution of the United States (1789), transferred this power to Congress; "The Congress shall have power...To coin money, regulate the value thereof, and of foreign coin, and fix the standard of weights and measures".

In January 1790 President Washington, in his first annual message to Congress stated that, "Uniformity in the currency, weights, and measures of the United States is an object of great importance, and will, I am persuaded, be duly attended to", and ordered Secretary of State Thomas Jefferson to prepare a plan for Establishing Uniformity in the Coinage, Weights, and Measures of the United States, afterwards referred to as the Jefferson report. On October 25, 1791, Washington appealed a third time to Congress, "A uniformity of the weights and measures of the country is among the important objects submitted to you by the Constitution and if it can be derived from a standard at once invariable and universal, must be no less honorable to the public council than conducive to the public convenience", but it was not until 1838 that a uniform set of standards was worked out.

History of agency

From 1830 until 1901, the role of overseeing weights and measures was carried out by the Office of Standard Weights and Measures, which was part of the U.S. Treasury Department.[4] In 1901, in response to a bill proposed by Congressman James H. Southard (R, Ohio), the National Bureau of Standards was founded with the mandate to provide standard weights and measures, and to serve as the national physical laboratory for the United States. (Southard had previously sponsored a bill for metric conversion of the United States.) [5] President Theodore Roosevelt appointed Samuel W. Stratton as the first director. The budget for the first year of operation was $40,000. The Bureau took custody of the copies of the kilogram and meter bars that were the standards for US measures, and set up a program to provide metrology services for United States scientific and commercial users. A laboratory site was constructed in Washington DC, and instruments were acquired from the national physical laboratories of Europe. In addition to weights and measures, the Bureau developed instruments for electrical units and for measurement of light. In 1905 a meeting was called that would be the first "National Conference on Weights and Measures".

Initially conceived as purely a metrology agency, the Bureau of Standards was directed by Herbert Hoover to set up divisions to develop commercial standards for materials and products. [5]page 133 Some of these standards were for products intended for government use, but product standards also affected private sector consumption. Quality standards were developed for products including some types of clothing, automobile brake systems and headlamps, antifreeze, and electrical safety. During World War I, the Bureau worked on multiple problems related to war production, even operating its own facility to produce optical glass when European supplies were cut off. Between the wars, Harry Diamond of the Bureau developed a blind approach radio aircraft landing system. During the Second World War, military research and development was carried out, including development of radio propagation forecast methods, the proximity fuze and the gUided bomb.

In 1948, financed by the Air Force, the Bureau began design and construction of SEAC, the Standards Eastern Automatic Computer. The computer went into operation in May 1950 using a combination of vacuum tubes and solid-state diode logic. About the same time the Standards Western Automatic Computer, was built at the Los Angeles office of the NBS and used for research there. A mobile version, DYSEAC, was built for the Signal Corps in 1954.

The "National Bureau of Standards" became the National Institute of Standards and Technology in 1988.[4]

Metric system

The Congress of 1866 legalized the use of the metric system through the passage of U.S. code 1952 Ed., Title 15, Ch 6, sections 204 and 205.[6] On May 20, 1875, 17 out of 20 countries signed a document known as the Metric Convention or the Treaty of the Meter which established the International Bureau of Weights and Measures under the control of an international committee elected by the General Conference on Weights and Measures.[7]

Organization

NIST is headquartered in Gaithersburg, Maryland, and operates a facility in Boulder, Colorado. NIST's activities are organized into laboratory programs, and extramural programs. Effective October 1, 2010, NIST was realigned by reducing the number of NIST laboratory units from ten to six.[8] NIST Laboratories include:[9]

Extramural programs include:

  • Hollings Manufacturing Extension Partnership (MEP), a nationwide network of centers to assist small and mid-sized manufacturers to create and retain jobs, improve efficiencies, and minimize waste through process improvements and to increase market penetration with innovation and growth strategies;
  • Technology Innovation Program (TIP), a grant program where NIST and industry partners cost share the early-stage development of innovative but high-risk technologies;
  • Malcolm Baldrige National Quality Award program, the nation's highest award for performance and business excellence.

NIST's Boulder laboratories are best known for NIST‑F1, which houses an atomic clock. NIST‑F1 serves as the source of the nation's official time. From its measurement of the natural resonance frequency of caesium—which is used to define the second—NIST broadcasts time signals via longwave radio station WWVB at Fort Collins, Colorado, and shortwave radio stations WWV and WWVH, located at Fort Collins, Colorado, and Kekaha, Hawaii, respectively.

NIST AML building

NIST also operates a neutron science user facility: the NIST Center for Neutron Research (NCNR). The NCNR provides scientists access to a variety of neutron scattering instruments, which are used in many fields of research (materials science, fuel cells, biotechnology, etc.).

The SURF III Synchrotron Ultraviolet Radiation Facility is a source of synchrotron radiation, in continuous operation since 1961. SURF III now serves as the U.S. national standard for source-based radiometry throughout the generalized optical spectrum. All NASA-borne extreme-ultraviolet observation instruments have been calibrated at SURF since the 1970s, and SURF is used for measurement and characterization of systems for extreme ultraviolet lithography.

The Center for Nanoscale Science and Technology (CNST) performs research in nanotechnology, both through internal research efforts and by running a user-accessible cleanroom nanomanufacturing facility. This "NanoFab" is equipped with tools for lithographic patterning and imaging (e.g., electron microscopes and atomic force microscopes).

Measurements and standards

Light from the NIST SURF III Synchrotron Ultraviolet Radiation Facility

As part of its mission, NIST supplies industry, academia, government, and other users with over 1,300 Standard Reference Materials (SRMs). These artifacts are certified as having specific characteristics or component content, used as calibration standards for measuring equipment and procedures, quality control benchmarks for industrial processes, and experimental control samples.

Handbook 44

NIST publishes the Handbook 44 each year after the annual meeting of the National Conference on Weights and Measures (NCWM). Each edition is developed through cooperation of the Committee on Specifications and Tolerances of the NCWM and the Weights and Measures Division (WMD) of the NIST. The purpose of the book is a partial fulfillment of the statutory responsibility for "cooperation with the states in securing uniformity of weights and measures laws and methods of inspection".

NIST has been publishing various forms of what is now the Handbook 44 since 1918 and began publication under the current name in 1949. The 2010 edition conforms to the concept of the primary use of the SI (metric) measurements recommended by the Omnibus Foreign Trade and Competitiveness Act of 1988.[10][11]

Committees

NIST has seven standing committees:

  • Technical Guidelines Development Committee (TGDC)
  • Advisory Committee on Earthquake Hazards Reduction (ACEHR)
  • National Construction Safety Team Advisory Committee (NCST Advisory Committee)
  • Information Security and Privacy Advisory Board (ISPAB)
  • Visiting Committee on Advanced Technology (VCAT)
  • Baldrige National Quality Program Board of Overseers (BNQP Board of Overseers)
  • Manufacturing Extension Partnership National Advisory Board (MEPNAB)

Homeland security

NIST is currently developing government-wide identification card standards for federal employees and contractors to prevent unauthorized persons from gaining access to government buildings and computer systems.

World Trade Center Collapse Investigation

In 2002 the National Construction Safety Team Act mandated NIST to conduct an investigation into the collapse of the World Trade Center buildings 1 and 2 and the 47-story 7 World Trade Center. The "World Trade Center Collapse Investigation", directed by lead investigator Shyam Sunder,[12] covered three aspects, including a technical building and fire safety investigation to study the factors contributing to the probable cause of the collapses of the WTC Towers (WTC 1 and 2) and WTC 7. NIST also established a research and development program to provide the technical basis for improved building and fire codes, standards, and practices, and a dissemination and technical assistance program to engage leaders of the construction and building community in implementing proposed changes to practices, standards, and codes. NIST also is providing practical guidance and tools to better prepare facility owners, contractors, architects, engineers, emergency responders, and regulatory authorities to respond to future disasters. The investigation portion of the response plan was completed with the release of the final report on 7 World Trade Center on November 20, 2008. The final report on the WTC Towers – including 30 recommendations for improving building and occupant safety – was released on October 26, 2005.[13]

Election technology

NIST works in conjunction with the Technical Guidelines Development Committee of the Election Assistance Commission to develop the Voluntary Voting System Guidelines for voting machines and other election technology.

SAMATE

SAMATE (Software Assurance Metrics And Tool Evaluation) is a NIST project focused on improving software assurance by developing methods to enable software tool evaluations, measuring the effectiveness of tools and techniques, and identifying gaps in tools and methods.[14]

People

Four researchers at NIST have been awarded Nobel Prizes for their work in physics: William D. Phillips in 1997, Eric A. Cornell in 2001, John L. Hall in 2005 and David J. Wineland in 2012, which is the largest number for any U.S. government laboratory. All four were recognized for their work in laser cooling of atoms, which is directly related to the development and advancement of the atomic clock. In 2011, Dan Shechtman was awarded the Nobel Prize in chemistry for his work on quasicrystals in the Metallurgy Division in 1982-1984. Other notable people who have worked at NIST include:

  • Milton Abramowitz
  • James S. Albus
  • Ferdinand Brickwedde
  • Lyman James Briggs
  • Edgar Buckingham
  • John W. Cahn
  • William Coblentz
  • Ronald Colle
  • Philip J. Davis
  • Hugh L. Dryden
  • Jack Edmonds
  • Ugo Fano
  • Charlotte Froese Fischer
  • Tim Foecke
  • John C. Garand
  • Douglas Hartree
  • Magnus Hestenes
  • Cornelius Lanczos
  • Wilfrid Mann
  • William Meggers
  • James G. Nell
  • Ward Plummer
  • Jacob Rabinow
  • Richard Saykally
  • Dan Shechtman
  • Charlotte Moore Sitterly
  • Irene Stegun
  • Bill Stone
  • David Wineland

Directors

Since 1989, the director of NIST has been a Schedule-C Presidential appointee and is confirmed by the United States Senate, and since that year the average tenure of NIST directors has fallen from 11 years to 2 years in duration. Since the 2011 reorganization of NIST, the director also holds the title of Undersecretary of Commerce for Technology. Fourteen persons have officially held the position (in addition to three acting directors who served temporarily). They are:

  • Samuel W. Stratton, 1901–1922
  • George K. Burgess, 1923–1932
  • Lyman J. Briggs, 1932–1945
  • Edward U. Condon, 1945–1951
  • Allen V. Astin, 1951–1969
  • Lewis M. Branscomb, 1969–1972
  • Richard W. Roberts, 1973–1975
  • Ernest Ambler, 1975–1989
  • John W. Lyons, 1990–1993
  • Arati Prabhakar, 1993–1997
  • Raymond G. Kammer, 1997–2000
  • Karen Brown (acting), 2000–2001
  • Arden L. Bement Jr., 2001–2004
  • Hratch Semerjian (acting), 2004–2005
  • William Jeffrey, 2005–2007
  • James Turner (acting), 2007–2008
  • Patrick D. Gallagher, 2008–present

NBS Director Allen V. Astin is the father of actor John Astin and the grandfather of actor Sean Astin.

See also

  • Advanced Encryption Standard process
  • AD-X2
  • Inorganic Crystal Structure Database (ICSD)
  • International System of Units, see International Bureau of Weights and Measures
  • ISO 17025 - used by testing and calibration laboratories
  • Journal of Research of the National Institute of Standards and Technology
  • Metrology
  • National Software Reference Library
  • NIST hash function competition
  • WWV (radio station)

References

  1. ^ NIST General Information. Retrieved on August 21, 2010.
  2. ^ "NIST Budget, Planning and Economic Studies". National Institute of Standards and Technology. October 5, 2010. Retrieved October 6, 2010. 
  3. ^ NBS special publication 447-Retrieved 2011-09-28
  4. ^ a b Records of the National Institute of Standards and Technology (NIST), National Archives website, (Record Group 167), 1830-1987.
  5. ^ a b John Perry, The Story of Standards, Funk and Wagnalls, 1953, Library of Congress Cat. No. 55-11094, p. 123
  6. ^ NIST history page 41-Retrieved 2011-09-28
  7. ^ International standards: page 22; -Retrieved 2011-09-28
  8. ^ NIST Strengthens Laboratory Mission Focus with New Structure
  9. ^ NIST Laboratories. National Institute of Standards and Technology. Retrieved on October 6, 2010.
  10. ^ Handbook 44- "Forward; page 5" Retrieved: 2011-09-28
  11. ^ 100th Congress (1988) (Jun 16, 1988). "H.R. 4848". Legislation. GovTrack.us. Retrieved September 28, 2011. "Omnibus Trade and Competitiveness Act of 1988" 
  12. ^ Eric Lipton (August 22, 2008). "Fire, Not Explosives, Felled 3rd Tower on 9/11, Report Says". New York Times. 
  13. ^ "Final Reports of the Federal Building and Fire Investigation of the World Trade Center Disaster". National Institute of Standards and Technology. October 2005. 
  14. ^ Introduction to SAMATE National Institute of Standards and Technology. Retrieved on October 12, 2009.

External links


(Prev) National Industrial Security P ...National Institutes of Health (Next)