DVD

DVD

DVD-R read/write side
Media type	Optical disc
Capacity	4.7 GB (single-sided, single-layer – common) 8.5–8.7 GB (single-sided, double-layer) 9.4 GB (double-sided, single-layer) 17.08 GB (double-sided, double-layer – rare)
Read mechanism	650 nm laser, 10.5 Mbit/s (1�-)
Write mechanism	10.5 Mbit/s (1�-)
Standard	DVD Forum's DVD Books[1][2][3] and DVD+RW Alliance specifications
Weight	16g[4]

DVD is an optical disc storage format, invented and developed by Philips, Sony, Toshiba, and Panasonic in 1995. DVDs offer higher storage capacity than Compact Discs while having the same dimensions.

Pre-recorded DVDs are mass-produced using molding machines that physically stamp data onto the DVD. Such discs are known as DVD-ROM, because data can only be read and not written nor erased. Blank recordable DVD discs (DVD-R and DVD+R) can be recorded once using a DVD recorder and then function as a DVD-ROM. Rewritable DVDs (DVD-RW, DVD+RW, and DVD-RAM) can be recorded and erased multiple times.

DVDs are used in DVD-Video consumer digital video format and in DVD-Audio consumer digital audio format, as well as for authoring AVCHD discs. DVDs containing other types of information may be referred to as DVD data discs.

History

Before the advent of DVD in 1995, Video CD (VCD) became the first format for distributing digitally encoded films on standard 120 mm (4.7 in) optical discs. (Its predecessor, CD Video, used analog video encoding.) VCD was on the market in 1993.^[5] In the same year, two new optical disc storage formats were being developed. One was the Multimedia Compact Disc (MMCD), backed by Philips and Sony, and the other was the Super Density (SD) disc, supported by Toshiba, Time Warner, Matsushita Electric, Hitachi, Mitsubishi Electric, Pioneer, Thomson, and JVC.

Representatives of the SD camp approached IBM, asking for advice on the file system to use for their disc as well as seeking support for their format for storing computer data. Alan E. Bell, a researcher from IBM's Almaden Research Center, got that request and also learned of the MMCD development project. Wary of being caught in a repeat of the costly videotape format war between VHS and Betamax in the 1980s, he convened a group of computer industry experts, including representatives from Apple, Microsoft, Sun Microsystems, Dell, and many others. This group was referred to as the Technical Working Group, or TWG.

The TWG voted to boycott both formats unless the two camps agreed on a single, converged standard.^[6] Lou Gerstner, president of IBM, was recruited to apply pressure on the executives of the warring factions. In one example of a significant compromise, proposal SD 9, where both layers of the dual-layered disc would be read from the same side, was adopted over proposal SD 10, which would have created a "flippy" disc that users "would have to remove, turn over, and reinsert to read the other side."^[7] This resulted in the DVD specification providing a storage capacity of 4.7GB for a single-layered, single-sided disc and 8.5GB for a dual-layered, single-sided disc.^[7] After other compromises between MMCD and SD, the computer companies through TWG won the day, and a single format, now called DVD, was agreed upon. The TWG also collaborated with the Optical Storage Technology Association (OSTA) on the use of their implementation of the ISO-13346 file system (known as Universal Disk Format) for use on the new DVDs.

Philips and Sony decided that it was in their best interests to avoid another format war over their Multimedia Compact Disc, and agreed to unify with companies backing the Super Density Disc to release a single format with technologies from both. The specification was mostly similar to Toshiba and Matsushita's Super Density Disc, except for the dual-layer option (MMCD was single-sided and optionally dual-layer, whereas SD was single-layer but optionally double-sided) and EFMPlus modulation.

Specifications

The DVD specifications created and updated by the DVD Forum are published as so-called DVD Books (e.g. DVD-ROM Book, DVD-Audio Book, DVD-Video Book, DVD-R Book, DVD-RW Book, DVD-RAM Book, DVD-AR Book, DVD-VR Book, etc.).^[1][2][3]

Some specifications for mechanical, physical and optical characteristics of DVD optical discs can be downloaded as freely available standards from the ISO website.^[8] Also, the DVD+RW Alliance publishes competing DVD specifications such as DVD+R, DVD+R DL, DVD+RW or DVD+RW DL. These DVD formats are also ISO standards.^{[9][10][11][12]}

Some of DVD specifications (e.g. for DVD-Video) are not publicly available and can be obtained only from the DVD Format/Logo Licensing Corporation for a fee of US $5000.^[13][14] Every subscriber must sign a non-disclosure agreement as certain information in the DVD Book is proprietary and confidential.^[13]

Etymology

When first invented in 1995, DVD was an initialism for the unofficial term digital videodisk.^[15]

Within the next few years, certain members of the DVD Forum proposed the backronym digital versatile disc to express that DVD goes beyond video. However, according to Jim Taylor, a prominent industry figure, the forum never universally accepted this name and a 1999 report decreed that DVD was "simply three letters" and stood for "nothing".^[16]

Today, usage varies and there is no universal agreement. Digital versatile disc has gained wide acceptance and is used by the official DVD charter.^[17] However, others such as Toshiba (who maintain the DVD Forum Web site) still use the original digital video disc,^[16] while Jim Taylor’s FAQ still maintains that DVD has never officially stood for anything.^[16]

Identification (MID)

The DVD is made of a spiral groove read or written starting at the center. The form of the groove encodes unalterable identification data known as Media Identification Code (MID). The MID contains data such as the manufacturer and model, byte capacity, allowed data rates (also known as speed), etc.

Design

Perbandingan -- several forms of disk storage showing tracks (not-to-scale); green denotes start and red denotes end.
* Some CD-R(W) and DVD-R(W)/DVD+R(W) recorders operate in ZCLV, CAA or CAV modes, but most work in Constant linear velocity (CLV) mode.

As a movie delivery medium

DVD was adopted by movie and home entertainment distributors to replace the ubiquitous VHS tape as the primary means of distributing films to consumers in the home entertainment marketplace. DVD was chosen for its superior ability to reproduce moving pictures and sound, for its superior durability, and for its interactivity. Interactivity had proven to be a feature which consumers, especially collectors, favored when the movie studios released their films on LaserDisc. When the price point for a LaserDisc at approximately $100 per disc moved to $20 per disc at retail, this luxury feature became available for mass consumption. Simultaneously, the movie studios decided to change their home entertainment release model from a rental model to a for purchase model, and large numbers of DVDs were sold.

At the same time, a demand for interactive design talent and services was created. Movies in the past had uniquely designed title sequences. Suddenly every movie being released required information architecture and interactive design components that matched the film's tone and were at the quality level that Hollywood demanded for its product.

As an interactive medium

DVD as a format had two qualities at the time that were not available in any other interactive medium: enough capacity and speed to provide high quality, full motion video and sound, and low cost delivery mechanism provided by consumer products retailers. Retailers would quickly move to sell their players for under $200, and eventually for under $50 at retail. In addition, the medium itself was small enough and light enough to mail using general first class postage. Almost overnight, this created a new business opportunity and model for business innovators, such as Netflix, to re-invent the home entertainment distribution model. It also opened up the opportunity for business and product information to be inexpensively provided on full motion video through direct mail.

Capacity

The basic types of DVD (12 cm diameter, single-sided or homogeneous double-sided) are referred to by a rough approximation of their capacity in gigabytes. In draft versions of the specification, DVD-5 indeed held five gigabytes, but some parameters were changed later on as explained above, so the capacity decreased. Other formats, those with 8 cm diameter and hybrid variants, acquired similar numeric names with even larger deviation.

The 12 cm type is a standard DVD, and the 8 cm variety is known as a MiniDVD. These are the same sizes as a standard CD and a mini-CD, respectively. The capacity by surface (MiB/cm²) varies from 6.92 MiB/cm² in the DVD-1 to 18.0 MiB/cm² in the DVD-18.

As with hard disk drives, in the DVD realm, gigabyte and the symbol GB are usually used in the SI sense (i.e., 10⁹, or 1,000,000,000 bytes). For distinction, gibibyte (with symbol GiB) is used (i.e., 1024³ (2³⁰), or 1,073,741,824 bytes).

Each DVD sector contains 2,418 bytes of data, 2,048 bytes of which are user data. There is a small difference in storage space between + and - (hyphen) formats:

Scan of a DVD 4.5 capacity disc

Size comparison: a 12 cm DVD+RW and a 19 cm pencil

DVD-RW Drive operating with the protective cover removed.

Technology

Perbandingan -- various optical storage media

DVD uses 650 nm wavelength laser diode light as opposed to 780 nm for CD. This permits a smaller pit to be etched on the media surface compared to CDs (0.74 µm for DVD versus 1.5 µm for CD), allowing in part for DVD's increased storage capacity.

In comparison, Blu-ray Disc, the successor to the DVD format, uses a wavelength of 405 nm, and one dual-layer disc has a 50 GB storage capacity.

Writing speeds for DVD were 1�-, that is, 1,385 kB/s (1,353 KiB/s), in the first drives and media models. More recent models, at 18�- or 20�-, have 18 or 20 times that speed. Note that for CD drives, 1�- means 153.6 kB/s (150 KiB/s), about one-ninth as swift.^[20][22]

Internal mechanism of a drive

Internal mechanism of a DVD-ROM Drive. See text for details.

This mechanism is shown right side up; the disc would sit on top of it. The laser and optical system scans the underside of the disc.

With reference to the photo, just to the right of image center is the disc spin motor, a gray cylinder, with its gray centering hub and black resilient drive ring on top. There is a disc-shaped round clamp, loosely held inside the cover and free to rotate; it's not in the photo. After the disc tray stops moving inward, as the motor and its attached parts rise, a magnet near the top of the rotating assembly contacts and strongly attracts the clamp to hold and center the disc. This motor has an external rotor – every visible part of it spins.

The gray metal chassis is shock-mounted at its four corners to reduce sensitivity to external shocks, and to reduce drive noise from residual imbalance when running fast. The soft shock mount grommets are just below the brass-colored washers at the four corners (the left one is obscured). Running through those grommets are screws to fasten them to the black plastic frame that's underneath.

Two parallel precision guide rods that run between upper left and lower right in the photo carry the "sled", the moving optical read-write head. As shown, this "sled" is close to, or at the position where it reads or writes at the edge of the disc.

A dark gray disc with two holes on opposite sides has a blue lens surrounded by silver-colored metal. This is the lens that's closest to the disc; it serves to both read and write by focusing the laser light to a very small spot. Under the disc is an ingenious actuator comprising permanent magnets and coils that move the lens up and down to maintain focus on the data layer. As well, the actuator moves the lens slightly toward and away from the spin-motor spindle to keep the spot on track. Both focus and tracking are relatively quite fast and very precise. These servos are comparatively wideband.

To select tracks (or files) as well as advancing the "sled" during continuous read or write operations, a motor (it could be a stepping motor; one would hear it if it were) rotates a coarse-pitch leadscrew to move the "sled" throughout its total travel range. The motor, itself, is the gray cylinder just to the left of the most-distant shock mount; its shaft is parallel to the support rods. The leadscrew is the rod with evenly-spaced darker details; these are the helical groove that engages a pin on the "sled".

The irregular orange material is flexible etched copper foil supported by thin sheet plastic; these are "flexible printed circuits" that connect everything to the electronics (which is not shown).

DVD recordable and rewritable

Sony DVD Read & Rewritable

HP initially developed recordable DVD media from the need to store data for backup and transport.

DVD recordables are now also used for consumer audio and video recording. Three formats were developed: DVD-R/RW, DVD+R/RW (plus), and DVD-RAM. DVD-R is available in two formats, General (650 nm) and Authoring (635 nm), where Authoring discs may be recorded with CSS encrypted video content but General discs may not.^[24]

Although most DVD writers can nowadays write the DVD+R/RW and DVD-R/RW formats (usually denoted by "DVD±RW" and/or the existence of both the DVD Forum logo and the DVD+RW Alliance logo), the "plus" and the "dash" formats use different writing specifications. Most DVD readers and players will play both kinds of discs, although older models can have trouble with the "plus" variants.

Some first generation DVD players would cause damage to DVD±R/RW/DL when attempting to read them.

Dual-layer recording

Dual-layer recording (sometimes also known as double-layer recording) allows DVD-R and DVD+R discs to store significantly more data—up to 8.5 gigabytes per disc, compared with 4.7 gigabytes for single-layer discs. Along with this, DVD-DLs have slower write speeds as compared to ordinary DVDs. When played, a slight transition can sometimes be seen in the playback when the player changes layers. DVD-R DL was developed for the DVD Forum by Pioneer Corporation; DVD+R DL was developed for the DVD+RW Alliance by Philips and Mitsubishi Kagaku Media (MKM).^[25]

A dual-layer disc differs from its usual DVD counterpart by employing a second physical layer within the disc itself. The drive with dual-layer capability accesses the second layer by shining the laser through the first semitransparent layer. In some DVD players, the layer change can exhibit a noticeable pause, up to several seconds.^[26] This caused some viewers to worry that their dual-layer discs were damaged or defective, with the end result that studios began listing a standard message explaining the dual-layer pausing effect on all dual-layer disc packaging.

DVD recordable discs supporting this technology are backward-compatible with some existing DVD players and DVD-ROM drives.^[25] Many current DVD recorders support dual-layer technology, and the price is now comparable to that of single-layer drives, although the blank media remain more expensive. The recording speeds reached by dual-layer media are still well below those of single-layer media. A potential reason is how Dual Layer discs are not as well matured compared to the Single Layer discs, as well as consumers, on a whole, have no desire for increased burning speeds.

There are two modes for dual-layer orientation. With Parallel Track Path (PTP), used on DVD-ROM, both layers start at the inside diameter (ID) and end at the outside diameter (OD) with the lead-out. With Opposite Track Path (OTP), used on many Digital Video Discs, the lower layer starts at the ID and the upper layer starts at the OD, where the other layer ends; they share one lead-in and one lead-out.

DVD-Video

DVD-Video is a standard for storing and distributing video/audio content on DVD media. The format went on sale in Japan in 1996, in the United States in 1997, in Europe in 1998 and in Australia in 1999.^[27] DVD-Video became the dominant form of home video distribution in Japan when it first went on sale in 1996, but did not become the dominant form of home video distribution in the United States until June 15, 2003, when weekly DVD-Video in the United States rentals began outnumbering weekly VHS cassette rentals, reflecting the rapid adoption rate of the technology in the U.S. marketplace.^[6][28] Currently, DVD-Video is the dominant form of home video distribution worldwide, although in Japan it was surpassed by Blu-ray Disc when Blu-ray first went on sale in Japan on March 31, 2006.

Security

The Content Scramble System (CSS) is a Digital Rights Management (DRM) and encryption system employed on almost all commercially produced DVD-video discs. CSS utilizes a proprietary 40-bit stream cipher algorithm. The system was introduced around 1996 and was first compromised in 1999.

The purpose of CSS is twofold:

1. CSS prevents byte-for-byte copies of an MPEG (digital video) stream from being playable since such copies do not include the keys that are hidden on the lead-in area of the restricted DVD.
2. CSS provides a reason for manufacturers to make their devices compliant with an industry-controlled standard, since CSS scrambled discs cannot in principle be played on noncompliant devices; anyone wishing to build compliant devices must obtain a license, which contains the requirement that the rest of the DRM system (region codes, Macrovision, and user operation prohibition) be implemented.^[29]

While most CSS-decrypting software is used to play DVD videos, other pieces of software (such as DVD Decrypter, AnyDVD, DVD43, Smartripper, and DVD Shrink) can copy a DVD to a hard drive and remove Macrovision, CSS encryption, region codes and user operation prohibition.

Consumer restrictions

The rise of filesharing and "piracy" has prompted many copyright holders to display notices on DVD packaging or displayed on screen when the content is played that warn consumers of the illegality of certain uses of the DVD. It is commonplace to include a 90 second advert warning that most forms of copying the contents are illegal. Many DVDs prevent skipping past or fast-forwarding through this warning.

Arrangements for renting and lending differ by geography. In the U.S., the right to re-sell, rent, or lend out bought DVDs is protected by the first-sale doctrine under the Copyright Act of 1976. In Europe, rental and lending rights are more limited, under a 1992 European Directive that gives copyright holders broader powers to restrict the commercial renting and public lending of DVD copies of their work.

DVD-Audio

DVD-Audio is a format for delivering high fidelity audio content on a DVD. It offers many channel configuration options (from mono to 5.1 surround sound) at various sampling frequencies (up to 24-bits/192 kHz versus CDDA's 16-bits/44.1 kHz). Compared with the CD format, the much higher-capacity DVD format enables the inclusion of considerably more music (with respect to total running time and quantity of songs) and/or far higher audio quality (reflected by higher sampling rates and greater sample resolution, and/or additional channels for spatial sound reproduction). This DVD-Audio technique was first used by the brothers Lagkind.^{[citation needed]}

Despite DVD-Audio's superior technical specifications, there is debate as to whether the resulting audio enhancements are distinguishable in typical listening environments. DVD-Audio currently forms a niche market, probably due to the very sort of format war with rival standard SACD that DVD-Video avoided.

Security

DVD-Audio discs employ a DRM mechanism, called Content Protection for Prerecorded Media (CPPM), developed by the 4C group (IBM, Intel, Matsushita, and Toshiba).

Although CPPM was supposed to be much harder to crack than a DVD-Video CSS, it too was eventually cracked in 2007 with the release of the dvdcpxm tool. The subsequent release of the libdvdcpxm library (which is based on dvdcpxm) allowed for the development of open source DVD-Audio players and ripping software, such as DVD-Audio Explorer.^[30] As a result, making 1:1 copies of DVD-Audio discs is now possible with relative ease, much like DVD-Video discs.

Successors

In 2006, two new formats called HD DVD and Blu-ray Disc were released as the successor to DVD. HD DVD competed unsuccessfully with Blu-ray Disc in the format war of 2006–2008. A dual layer HD DVD can store up to 30GB and a dual layer Blu-ray disc can hold up to 50GB.^[31][32]

However, unlike previous format changes, e.g., audio tape to Compact Disc or VHS videotape to DVD, there is no immediate indication that production of the standard DVD will gradually wind down, as they still dominate, with around 75% of video sales and approximately one billion DVD player sales worldwide as of 3 April 2011. In fact, experts claim that the DVD will remain the dominant medium for at least another five years as Blu-ray technology is still in its introductory phase, write and read speeds being poor as well as the fact of necessary hardware being expensive and not readily available.^[6][33][34]

Consumers initially were also slow to adopt Blu-ray due to the cost.^[35] By 2009, 85% of stores were selling Blu-ray Discs. A high-definition television and appropriate connection cables are also required to take advantage of Blu-ray disc. Some analysts suggest that the biggest obstacle to replacing DVD is due to its installed base; a large majority of consumers are satisfied with DVDs.^[36] The DVD succeeded because it offered a compelling alternative to VHS. In addition, Blu-ray players and now defunct format HD DVD players are designed to be backward-compatible, allowing older DVDs to be played since the media are physically identical; this differed from the change from vinyl to CD and from tape to DVD, which involved a complete change in physical medium. As of 2012^[update] it is still commonplace for major releases to be issued in "combo pack" format, including both a DVD and a Blu-ray disc (as well as, in many cases, a third disc with an authorized digital copy). Also, some multi-disc sets use Blu-ray for the main feature, but DVDs for supplementary features (examples of this include the Harry Potter "Ultimate Edition" collections, the 2009 re-release of the 1967 The Prisoner TV series, and a 2007 collection related to Blade Runner). Another reason cited (July 2011) for the slower transition to Blu-ray from DVD is the necessity of and confusion over "firmware updates" and needing an internet connection to perform updates.

This situation can be best compared to the changeover from 78 rpm shellac recordings to 45 rpm and 33⅓ rpm vinyl recordings; because the medium used for the earlier format was virtually the same as the latter version (a disc on a turntable, played using a needle), phonographs continued to be built to play obsolete 78s for decades after the format was discontinued. Manufacturers continue to release standard DVD titles as of 2012^[update], and the format remains the preferred one for the release of older television programs and films, with some programs such as Star Trek: The Original Series needing to be re-scanned to produce a high definition version from the original film recordings (certain special effects were also updated in order to be better received in high-definition viewing).^[37] In the case of Doctor Who, a series primarily produced on standard definition videotape between 1963 and 1989, BBC Video reportedly intends to continue issuing DVD-format releases of that series until at least November 2013.

Use as backup medium

Durability of DVDs is measured by how long the data may be read from the disc, assuming compatible devices exist that can read it: that is, how long the disc can be stored until data is lost. Five factors affect durability: sealing method, reflective layer, organic dye makeup, where it was manufactured, and storage practices.^[38]

The longevity of the ability to read from a DVD+R or DVD-R is largely dependent on manufacturing quality, ranging from 2 to 15 years,^[39][40][41] and is believed to be an unreliable medium for backup unless great care is taken for storage conditions and handling.

According to the Optical Storage Technology Association (OSTA), "manufacturers claim life spans ranging from 30 to 100 years for DVD, DVD-R and DVD+R discs and up to 30 years for DVD-RW, DVD+RW and DVD-RAM".^[42]

See also

References

Further reading

External links

• All About Converting From Several Video Formats To DVD at Wikibooks
• DVD at the Open Directory Project
• Dual Layer Explained – Informational Guide to the Dual Layer Recording Process
• DVD Frequently Asked Questions (and Answers)
• DVD Burning and Ripping: A Primer, A Glossary
• YouTube: Segment from 1997 Toshiba DVD demo disc: Technical information about the then-new DVD format, from "DVD Gallery," an in-store demonstration disc from Toshiba