Moore machine

In the theory of computation, a Moore machine is a finite-state machine whose output values are determined solely by its current state. This is in contrast to a Mealy machine, whose output values are determined both by its current state and by the values of its inputs. The Moore machine is named after Edward F. Moore, who presented the concept in a 1956 paper, “Gedanken-experiments on Sequential Machines.”^[1]

1 Formal definition
2 Visual representation
- 2.1 Table
- 2.2 Diagram
3 Relationship with Mealy machines
4 Examples
- 4.1 Simple
- 4.2 Complex
5 Gedanken-experiments
6 See also
7 References
8 Further reading

Formal definition

A Moore machine can be defined as a 6-tuple ( S, S₀, Σ, Λ, T, G ) consisting of the following:

a finite set of states ( S )
a start state (also called initial state) S₀ which is an element of (S)
a finite set called the input alphabet ( Σ )
a finite set called the output alphabet ( Λ )
a transition function (T : S × Σ → S) mapping a state and the input alphabet to the next state
an output function (G : S → Λ) mapping each state to the output alphabet

A Moore machine can be regarded as a restricted type of finite state transducer.

Visual representation

Table

State transition table is a table showing relation between an input and a state.

Diagram

The state diagram for a Moore machine or Moore diagram is a diagram that associates an output value with each state.

Relationship with Mealy machines

The difference between Moore machines and Mealy machines is that in the latter, the output of a transition is determined by the combination of current state and current input. In other words: in a diagram

for a Moore machine, each node (state) is labeled with an output value;
for a Mealy machine, each arc (transition) is labeled with an output value.

Every Moore machine M is equivalent to the Mealy machine with the same states and transitions and the output function that takes each state-input pair (q,x) to G_M(q), where G_M is M's output function.

Conversely, every Mealy machine M is equivalent to the Moore machine with as its states all pairs of S × Λ of M, and as its transitions ((q,o),y) → (T_M(q,y),G_M(q,y)), and as output function (q,o) → o, where T_M and G_M are M's transition resp. output functions.

Examples

Types according to number of inputs/outputs.

Simple

Simple Moore machine have one input and one output:

edge detector using XOR
binary adding machine
clocked sequential systems (a restricted form of Moore machine where the state changes only when the global clock signal changes)

Most digital electronic systems are designed as clocked sequential systems. Clocked sequential systems are a restricted form of Moore machine where the state changes only when the global clock signal changes. Typically the current state is stored in flip-flops, and a global clock signal is connected to the "clock" input of the flip-flops. Clocked sequential systems are one way to solve metastability problems. A typical electronic Moore machine includes a combinational logic chain to decode the current state into the outputs (lambda). The instant the current state changes, those changes ripple through that chain, and almost instantaneously the output gets updated. There are design techniques to ensure that no glitches occur on the outputs during that brief period while those changes are rippling through the chain, but most systems are designed so that glitches during that brief transition time are ignored or are irrelevant. The outputs then stay the same indefinitely (LEDs stay bright, power stays connected to the motors, solenoids stay energized, etc.), until the Moore machine changes state again.

State diagram for an edge detector using XOR.
Moore machine in combinational logic

Complex

More complex Moore machines can have multiple inputs as well as multiple outputs.

Gedanken-experiments

In Moore's paper "Gedanken-experiments on Sequential Machines",^[1] the (n;m;p) automata (or machines) S are defined as having n states, m input symbols and p output symbols. Nine theorems are proved about the structure of S, and experiments with S. Later, S machines became known as Moore machines.

At the end of the paper, in Section Further problems, the following task is stated: Another directly following problem is the improvement of the bounds given at the theorems 8 and 9.

Moore's Theorem 8 is formulated as: Given an arbitrary (n;m;p) machine S, such that every two of its states are distinguishable from one another, then there exists an experiment of length $\frac{n(n-1)}{2}$ which determines the state of S at the end of the experiment.

In 1957, A. A. Karatsuba proved the following two theorems, which completely solved Moore's problem on the improvement of the bounds of the experiment length of his Theorem 8.

Theorem A. If S is an (n;m;p) machine, such that every two of its states are distinguishable from one another, then there exists a branched experiment of length at most $\frac{(n-1)(n-2)}{2} + 1$ through which one may determine the state of S at the end of the experiment.

Theorem B. There exists an (n;m;p) machine, every two states of which are distinguishable from one another, such that the length of the shortest experiments establishing the state of the machine at the end of the experiment is equal to $\frac{(n-1)(n-2)}{2} + 1$ .

Theorems A and B were used for the basis of the course work of a student of the fourth year, A. A. Karatsuba, "On a problem from the automata theory" which was distinguished by testimonial reference at the competition of student works of the faculty of mechanics and mathematics of Moscow Lomonosow State University in 1958. The paper by A. A. Karatsuba was given to the journal Uspekhi Mat. Nauk on 17 December 1958 and was published there in June 1960.^[2]

Until the present day (2011), Karatsuba's result on the length of experiments is the only exact nonlinear result, both in automata theory, and in similar problems of computational complexity theory.

References

^ ^a ^b Moore, Edward F (1956). "Gedanken-experiments on Sequential Machines". Automata Studies,Annals of Mathematical Studies (Princeton, N.J.: Princeton University Press) (34): 129–153.
^ Karatsuba, A. A. (1960). "Solution of one problem from the theory of finite automata". Usp. Mat. Nauk (15:3): 157–159.

Contents