Ionizing radiation

Ionizing radiation hazard symbol

2007 ISO radioactivity danger logo. The red background is intended to convey urgent danger, and the sign is intended to be used in long-term radioactive waste depositories, which might survive into a distant future where other danger symbols may be forgotten or misinterpreted.

Ionizing (or ionising) radiation is radiation composed of particles that individually carry enough kinetic energy to liberate an electron from an atom or molecule, ionizing it. Ionizing radiation is generated through nuclear reactions, either artificial or natural, by very high temperature (e.g. plasma discharge or the corona of the Sun), via production of high energy particles in particle accelerators, or due to acceleration of charged particles by the electromagnetic fields produced by natural processes, from lightning to supernova explosions.

When ionizing radiation is emitted by or absorbed by an atom, it can liberate a atomic particle (typically an electron, proton, or neutron, but sometimes an entire nucleus) from the atom. Such an event can alter chemical bonds and produce ions, usually in ion-pairs, that are especially chemically reactive. This greatly magnifies the chemical and biological damage per unit energy of radiation because chemical bonds will be broken in this process. If the atom was inside a crystal lattice in a solid phase, then a "hole" will exist where the original atom was.

Ionizing radiation includes cosmic rays, Alpha particles, Beta particles, Gamma rays, X-rays, and in general any charged particle moving at relativistic speeds. Neutrons are considered ionizing radiation at any speed. Ionizing radiation includes some portion of the ultraviolet spectrum, depending on context. Radio waves, microwaves, infrared light, and visible light are normally considered non-ionizing radiation, although very high intensity beams of these radiations can produce sufficient heat to exhibit some similar properties to ionizing radiation, by altering chemical bonds and removing electrons from atoms.

Ionizing radiation is ubiquitous in the environment, and comes from naturally occurring radioactive materials and cosmic rays. Common artificial sources are artificially produced radioisotopes, X-ray tubes and particle accelerators. Ionizing radiation is invisible and not directly detectable by human senses, so instruments such as Geiger counters are usually required to detect its presence. In some cases it may lead to secondary emission of visible light upon interaction with matter, such as in Cherenkov radiation and radioluminescence. It has many practical uses in medicine, research, construction, and other areas, but presents a health hazard if used improperly. Exposure to ionizing radiation causes damage to living tissue, and can result in mutation, radiation sickness, cancer, and death.

Ionization and the definition problem

Ionized air glows blue around a beam of particulate ionizing radiation from a cyclotron

The boundary between ionizing and non-ionizing radiation is fuzzy.^[1] In general, if the characteristic energy (kinetic energy in the case of massive particles, photon energy in the case of electromagnetic radiation, or mass energy in the case of antimatter) of the radiation particles is greater than the ionization energy of the target material, then each particle collision can be expected to ionize a target atom, no matter how low the power of the beam. This is an appealing bright line between ionizing and non-ionizing radiation, but it is subject to several caveats:

1. Most targets are composed of a variety of atoms which will have a range of ionization energies.
2. Particles can impart glancing blows that will only transfer part of their energy to the target.
3. Neutron capture can produce much higher energies than the neutron's original kinetic energy.
4. Full ionization and ion-pair production may not be necessary to trigger chemical reactions; the activation energy may be more relevant.
5. Radiation intensity may increase the frequency of collisions to the point that atoms may ionize from multiple excitations.

The boundary of greatest interest is for low intensity photon radiation striking organic material. Since the first ionization energy of hydrogen and oxygen are both 14 eV,^[2] the spectrum of ionizing radiation is commonly defined to start at approximately 10 eV (equivalent to a far ultraviolet wavelength of 124 nanometers).^[3][4] Some sources use the ionization energy of air to define the boundary at 33.97 eV (36.50 nm).^[5]:305 Others draw a boundary at 100 eV (12.4 nm).^[6] Since the energy of a carbon-carbon bond is 4.9 eV (250 nm),^[7] it might be just as reasonable to draw a conservative boundary there. (Although cleavage of such bonds would produce free radicals, not ions.) All of these figures lie partway within the spectrum of ultraviolet light. X-rays and gamma rays are above all of these definitions and are always considered ionizing radiation.

When considering high-intensity long exposure scenarios, as in suntanning, the probability of multiphoton ionization increases.^[8] However, ultraviolet light even of low intensity can cause radiation burns similar to those produced by x-ray or gamma radiation. This is the result of UV's ability to produce free radicals and reactive oxygen species in skin, even at photon energies that do not produce ionization or significant heating. Ultraviolet can also cause damage to skin as a result of photoreactions in collagen, which are non-ionizing but cause similar types of single-molecule damage. DNA molecules may be directly or indirectly damaged by UV radiation carrying enough energy to excite certain molecular bonds to form thymine dimers (pyrimidine dimers) (this causes sunburn).^[9] The major difference in the effect of ultraviolet and X-rays is that skin is largely opaque to ultraviolet, and therefore protects internal tissues from ultraviolet damage.

Even microwave radiation, which has a photon energy well below that of visible light and is usually considered non-ionizing, can be considered ionizing if it is intense enough.^[10]

Truly non-ionizing radiation can still heat materials, cause ordinary burns, and even raise materials to their ionization temperature. Such heating does not produce free radicals until higher temperatures (for example, flame temperatures or "browning" temperatures, and above) are attained. In contrast, ionizing radiation produces free radicals, such as reactive oxygen species, even at room temperatures and below. Free radical production is a primary basis for the particular danger to biological systems of relatively small amounts of ionizing radiation that are far smaller than needed to produce significant heating. Free radicals easily damage DNA, and ionizing radiation may also directly damage DNA by ionizing or breaking DNA molecules.

Free neutrons are able to cause many nuclear reactions in a variety of substances no matter their energy, because in many substances they give rise to high-energy nuclear reactions, and these (or their products) liberate enough energy to cause ionization. For this reason, free neutrons are normally considered effectively ionizing radiation, at any energy (see neutron radiation). Examples of other ionizing particles are alpha particles, beta particles, and cosmic rays. These charged particles are produced by nuclear forces, so their kinetic energy inevitably exceeds the ionization threshold of 10 or 33 eV, and commonly exceed thousands or even millions of eV of energy.

Types of ionizing radiation

Alpha (α) radiation consists of a fast moving helium-4 (4He) nucleus and is stopped by a sheet of paper. Beta (β) radiation, consisting of electrons, is halted by an aluminium plate. Gamma (γ) radiation, consisting of energetic photons, is eventually absorbed as it penetrates a dense material. Neutron (n) radiation consists of free neutrons that are blocked using light elements, like hydrogen, which slow and/or capture them. Not shown: galactic cosmic rays that consist of energetic charged nuclei like protons, helium nuclei, and high-charged nuclei called HZE ions.

Ionizing radiation is categorized by the nature of the particles making up the radiation. The various particles have different ionization mechanisms, and these may be grouped as directly or indirectly ionizing.

Directly Ionizing

Any charged massive particle can ionize atoms directly through Coulomb forces if it carries sufficient kinetic energy. This includes atomic nuclei, electrons, muons, charged pions, protons, and energetic charged nuclei stripped of their electrons, all of which must be moving at relativistic speeds in order to carry the required kinetic energy. The first two to be recognized were given special names which persist today: helium nuclei at relativistic speeds are called alpha particles, and electrons at relativistic speeds are called beta particles. Natural cosmic rays are primarily made up of relativistic protons, but also include heavier atomic nuclei like helium ions and HZE ions and muons. Charged pions are very short-lived and only seen in large amounts in particle accelerators.

A single charged massive particle can ionize a number of atoms along its path, gradually slowing down and dissipating its kinetic energy. This is a grave concern for astronauts who are outside the earth's magnetic field who receive solar particles from solar proton events and galactic cosmic rays from cosmic sources. These high-energy charged nuclei are blocked by earth's magnetic field but pose a major health concern for astronauts traveling to the moon and to any distant location beyond the earth orbit. Highly-charged HZE ions in particular are known to be extremely damaging, although protons make up the vast majority of galactic cosmic rays.

Beta

High-energy beta particles may produce bremsstrahlung as they pass through matter, or secondary electrons (delta ray); both can ionize in turn as an indirect ionization effect. Energetic Beta-particles, like those emitted by ³²P, are quickly decelerated by surrounding matter. The energy lost to deceleration is emitted in the form of X-rays called "bremsstrahlung," which translates to "braking radiation". Bremsstrahlung is of concern when shielding beta emitters. The intensity of bremsstrahlung increases with the increase in energy of the electrons and the atomic number of the absorbing medium.

Indirectly Ionizing

Photons

Photon radiation is called gamma rays if produced by a nuclear reaction, subatomic particle decay, or radioactive decay, and is otherwise called x-rays if produced outside the nucleus.^[11][12][13] X-rays normally have a lower energy than gamma rays, and an older convention was to define the boundary as a wavelength of 10⁻¹¹ m or a photon energy of 100 keV.^[14] That threshold was driven by limitations of older X-ray tubes and low awareness of isomeric transitions. Modern technologies and discoveries have resulted in a complete overlap between X-ray and gamma energies. In many fields they are functionally identical, differing for terrestrial studies only in origin of the radiation. In astronomy, however, where radiation origin often cannot be reliably determined, the old energy division has been preserved, with X-rays defined as being between about 120 eV and 120 keV, and gamma rays as being of any energy above 100 to 120 keV, regardless of source. Most astronomical "gamma-ray astronomy" are known not to originate in nuclear radioactive processes, but rather result from processes like those that produce astronomical X-rays, except driven by much more energetic electrons.

Even though photons are electrically neutral, they can ionize atoms directly through the photoelectric effect and the Compton effect. Either of those interactions will eject an electron at relativistic speeds, turning it into a beta particle that will ionize many more atoms. Since most of the affected atoms are ionized indirectly by the secondary beta particles, photons are considered to be indirectly ionizing.^[15]

Types of radiation - gamma rays are represented by wavy lines, charged particles and neutrons by straight lines. The little circles show where ionization processes occur.

Photoelectric absorption is the dominant mechanism in organic materials for photon energies below 100 keV, typical of classical X-ray tube originated X-rays. At energies beyond 100 keV, photons ionize matter increasingly through the Compton effect, and then indirectly through pair production at energies beyond 5 MeV. The diagram to the right shows two Compton scatterings happening sequentially. In every scattering event, the gamma ray transfers energy to an electron, and it continues on its path in a different direction and with reduced energy.

Charged nuclei

Charged nuclei are characteristic of mainly galactic cosmic rays and solar particle events and have no natural sources on the earth. In space, however, very high energy protons, helium nuclei, and HZE ions can be initially stopped by relatively thin layers of shielding, clothes, or skin. However, the resulting interaction will generate secondary radiation and cause cascading biological effects. If just one atom of tissue is displaced by an energetic proton, for example, the collision will cause further interactions in the body. This is called "linear energy transfer" (LET) which utilizes elastic scattering. LET can be visualized as a billiard ball hitting another in the manner of the conservation of momentum, sending both away with the energy of the first ball divided between the two unequally. When a charged nucleus strikes a relatively slow-moving nucleus of an object in space, LET occurs and neutrons, alpha particles, low-energy protons, and other nuclei will be released by the collisions and contribute to the total absorbed dose of tissue.^[16]

Neutrons

Neutrons have zero electrical charge and cannot directly cause ionization. For the best shielding of neutrons, hydrocarbons are used which have an abundance of hydrogen. However, fast neutrons will interact with the protons in hydrogen via LET, and this mechanism scatters the nuclei of the materials in the target area. When neutrons strike the hydrogen nuclei, proton radiation (fast protons) results. These protons are ionizing because they are of high energy, are charged, and interact with the electrons in matter. Neutrons that strike other nuclei besides hydrogen will transfer less energy to the other particle if LET does occur.

But for many nuclei struck by neutrons, inelastic scattering occurs. Whether elastic or inelastic scatter occurs is dependent on the speed of the neutron, whether fast or thermal or somewhere in between. It is also dependent on the nuclei it strikes and its neutron cross section. In inelastic scattering, neutrons are readily absorbed in a process called neutron capture and attributes to the neutron activation of the nucleus. Neutron interactions with most types of matter in this manner usually produce radioactive nuclei. The abundant oxygen-16 nucleus, for example, undergoes neutron activation, rapidly decays by a proton emission forming nitrogen-16, which decays to oxygen-16. This process contributes enormously to the radiation generated by a water-cooled nuclear reactor while operating, because the short-lived nitrogen-16 decay emits a powerful gamma ray and a proton. Another dramatic activation occurs when small amounts of cobalt-59 are activated to cobalt-60, one of the most significant, long-lasting radioactive isotopes of nuclear power generation due to the half-life of ⁶⁰Co.

In fissile materials, secondary neutrons may produce nuclear chain reactions, causing a larger amount of ionization from the daughter products of fission.

Neutrons of all energies are also radioactive, and thus produce a small amount of ionization via beta decay, which generates a proton and an electron.

In the diagram to the right, a neutron collides with a proton of the target material, and then becomes a fast recoil proton that ionizes in turn. At the end of its path, the neutron is captured by a nucleus in an (n,γ)-reaction that leads to the emission of a neutron capture photon. Such photons always have enough energy to qualify as ionizing radiation.

Antimatter

Positrons that are common artificial sources of ionizing radiation in medical PET scans, and this is due to the energy of annihilation with electrons in ordinary matter, which produces secondary gamma radiation.

Effects

Nuclear effects

Neutron radiation, alpha radiation, and extremely energetic gamma (> ~20 MeV) can cause nuclear transmutation and induced radioactivity. The relevant mechanisms are Neutron activation, alpha absorption, and photodisintegration. A large enough number of transmutations can change macroscopic properties and cause targets to become radioactive themselves, even after the original source is removed.

Chemical effects

Ionization of molecules can lead to radiolysis, (breaking chemical bonds,) and formation of highly reactive free radicals. These free radicals may then react chemically with neighbouring materials even after the original radiation has stopped. (e.g. ozone cracking of polymers by ozone formed by ionization of air). Ionizing radiation can disrupt crystal lattices in metals, causing them to become amorphous, with consequent swelling, material creep, and embrittlement. Ionizing radiation can also accelerate existing chemical reactions such as polymerization and corrosion, by contributing to the activation energy required for the reaction. Optical materials darken under the effect of ionizing radiation.

High-intensity ionizing radiation in air can produce a visible ionized air glow of telltale bluish-purplish color. The glow can be observed e.g. during criticality accidents, around mushroom clouds shortly after a nuclear explosion, or inside of a damaged nuclear reactor like during the Chernobyl disaster.

Monoatomic fluids, e.g. molten sodium, have no chemical bonds to break and no crystal lattice to disturb, so they are immune to the chemical effects of ionizing radiation. Simple diatomic compounds with very negative enthalpy of formation, such as hydrogen fluoride will reform rapidly and spontaneously after ionization.

Electronic effects

Ionization of materials temporarily increases their conductivity, potentially permitting damaging current levels. This is a particular hazard in semiconductor microelectronics employed in electronic equipment, with subsequent currents introducing operation errors or even permanently damaging the devices. Devices intended for high radiation environments such as the nuclear industry and extra atmospheric (space) applications may be made radiation hard to resist such effects through design, material selection, and fabrication methods.

Proton radiation found in space can also cause Single-event upsets in digital circuits.

Vacuum tubes are much less sensitive to radiation effects.

The electrical effects of ionizing radiation are exploited in gas-filled radiation detectors, e.g. the Geiger tube. The electrical discharge plasma however tends to cause aging of the gas and/or the detector electrodes.

Biological effects

Ionizing radiation is generally harmful and potentially lethal to living things but can have health benefits in radiation therapy for the treatment of cancer and thyrotoxicosis. Its most common impact is the induction of cancer with a latent period of years or decades after exposure. High doses can cause visually dramatic radiation burns, and/or rapid fatality through acute radiation syndrome. Controlled doses are used for medical imaging and radiotherapy. Some scientists suspect that low doses may have a mild hormetic effect that can improve health.^[17]

Some effects of ionizing radiation on human health are stochastic, meaning that their probability of occurrence increases with dose, while the severity is independent of dose. Radiation-induced cancer, teratogenesis, cognitive decline, and heart disease are all examples of stochastic effects. Other conditions such as radiation burns, acute radiation syndrome, chronic radiation syndrome, and radiation-induced thyroiditis are deterministic, meaning they reliably occur above a threshold dose, and their severity increases with dose. Deterministic effects are not necessarily more or less serious than stochastic effects; either can ultimately lead to a temporary nuisance or a fatality.

Measurement

The human body cannot sense ionizing radiation except in very high doses, but the effects of ionization can be used to characterize the radiation. Parameters of interest include disintegration rate, particle flux, particle type, beam energy, kerma, dose rate and cummulative dose received by a target. Particle type is determined by differential measurements in the presence of electrical fields, magnetic fields, or varying amounts of shielding. Dose values may represent absorbed, equivalent, effective, or committed dose. The monitoring and calculation of doses to safeguard human health is called dosimetry.

Radiation measuring instruments are commonly calibrated to provide readouts of more sophisticated quantities than what is actually measured. For example, most dosimeter give instantaneous readouts of equivalent dose or even effective dose, even though the directly measured quantity is actually fluence or sometimes kerma. Such calibrations make assumptions about the radiation type, beam energy, field uniformity, and range based on the expected use of the instrument. These assumptions are not universally applicable, and may produce very erroneous readings in some situations.^[18]

Uses

Ionizing radiation has many industrial, military, and medical uses. Its usefulness must be balanced with its hazards, a compromise that has shifted over time. For example, at one time, assistants in shoe shops used X-rays to check a child's shoe size, but this practice was halted when the risks of ionizing radiation were better understood.^[19]

Neutron radiation is essential to the working of nuclear reactors and nuclear weapons. The penetrating power of x-ray, gamma, beta, and positron radiation is used for medical imaging, nondestructive testing, and a variety of industrial gauges. Radioactive tracers are used in medical and industrial applications, as well as biological and radiation chemistry. Alpha radiation is used in static eliminators and smoke detectors. The sterilizing effects of ionizing radiation are useful for cleaning medical instruments, food irradiation, and the sterile insect technique. Measurements of Carbon-14, can be used to date the remains of long-dead organisms (such as wood that is thousands of years old).

Sources

Ionizing radiation is generated through nuclear reactions, nuclear decay, by very high temperature, or via acceleration of charged particles in electromagnetic fields. Natural sources include the sun, lightning and supernova explosions. Artificial sources include nuclear reactors, particle accelerators, and x-ray tubes.

The United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) itemized types of human exposures.

Background

The global average exposure of humans to ionizing radiation is about 3 mSv (0.3 rem) per year, 80% of which comes from nature. The remaining 20% results from exposure to human-made radiation sources, primarily for medical imaging. Average exposure is much higher in developed countries, mostly due to people having CT scans and receiving nuclear medicine. However, in some areas, the average background dose can be over 1,000 mrem (10 mSv) per year. An important source of natural radiation is radon gas, which seeps continuously from bedrock but can, because of its high density, accumulate in poorly ventilated houses.

The background rate for radiation varies considerably with location, being as low as 1.5 mSv/a (1.5 mSv per year) in some areas and over 100 mSv/a in others. The highest level of purely natural radiation recorded on the Earth's surface is 90µGy/h (0.8 Gy/yr) on a Brazilian black beach composed of monazite.^[20] The highest background radiation in an inhabited area is found in Ramsar, primarily due to naturally radioactive limestone used as a building material. Some 2000 of the most exposed residents receive an average radiation dose of 10 mGy per year, (1 rad/yr) ten times more than the ICRP recommended limit for exposure to the public from artificial sources.^[21] Record levels were found in a house where the effective radiation dose due to external radiation was 135 mSv/yr, (13.5 rem/yr) and the committed dose from radon was 640 mSv/yr. (64.0 rem/yr)^[22] This unique case is over 200 times higher than the world average background radiation.

Natural background radiation comes from five primary sources: cosmic radiation, solar radiation, external terrestrial sources, radiation in the human body and radon.

Cosmic radiation

The Earth, and all living things on it, are constantly bombarded by radiation from outside our solar system. This cosmic radiation consists of relativistic particles: positively-charged nuclei (ions) from 1 amu protons (about 85% of it) to 26 amu iron nuclei and even beyond. (The high-atomic number particles are called HZE ions.) The energy of this radiation can far exceed that which humans can create, even in the largest particle accelerators (see ultra-high-energy cosmic ray). This radiation interacts in the atmosphere to create secondary radiation that rains down, including x-rays, muons, protons, alpha particles, pions, electrons, and neutrons.

The dose from cosmic radiation is largely from muons, neutrons, and electrons, with a dose rate that varies in different parts of the world and based largely on the geomagnetic field, altitude, and solar cycle. The cosmic-radiation dose rate on airplanes is so high that, according to the United Nations UNSCEAR 2000 Report (see links at bottom), airline flight crew workers receive more dose on average than any other worker, including those in nuclear power plants. Airline crews receive more cosmic rays if they routinely work flight routes that take them close to the Earth's north pole at high altitudes, where this type of radiation is maximal.

Cosmic rays also include high-energy gamma rays which are far beyond the energies produced by solar or human sources.

External terrestrial sources

Most materials on Earth contain some radioactive atoms, even if in small quantities. Most of the dose received from these sources is from gamma-ray emitters in building materials, or rocks and soil when outside. The major radionuclides of concern for terrestrial radiation are isotopes of potassium, uranium, and thorium. Each of these sources has been decreasing in activity since the formation of the Earth.

Internal radiation sources

All earthly materials that are the building-blocks of life contain a radioactive component. As humans, plants, and animals consume food, air, and water, an inventory of radioisotopes builds up within the organism (see banana equivalent dose). Some radionuclides, like potassium-40, emit a high-energy gamma ray that can be measured by sensitive electronic radiation measurement systems. These internal radiation sources contribute to an individual's total radiation dose from natural background radiation.

Radon

Radon-222 is a gas produced by the decay of radium-226. Both are a part of the natural uranium decay chain. Uranium is found in soil throughout the world in varying concentrations. Since radon is a gas, it can accumulate in homes. Accumulation is dependent upon home location as well as building methods. Among non-smokers, radon is the number one cause of lung cancer and, overall, the second leading cause.^[23]

Artificial sources

Above the background level of radiation exposure, the U.S. Nuclear Regulatory Commission (NRC) requires that its licensees limit human-made radiation exposure for individual members of the public to 100 mrem (1 mSv) per year, and limit occupational radiation exposure to adults working with radioactive material to 5,000 mrem (50 mSv) per year. Occupationally exposed individuals are exposed according to the sources with which they work. The radiation exposure of these individuals is carefully monitored with the use of pocket-pen-sized instruments called dosimeters.

Examples of industries where occupational exposure is a concern include:

• Airline crew (the most exposed population)
• Industrial radiography
• Medical radiology and nuclear medicine^[24][25]
• Uranium mining
• Nuclear power plant and nuclear fuel reprocessing plant workers
• Research laboratories (government, university and private)

Some human-made radiation sources affect the body through direct radiation, while others take the form of radioactive contamination and irradiate the body from within.

Medical procedures, such as diagnostic X-rays, nuclear medicine, and radiation therapy are by far the most significant source of human-made radiation exposure to the general public. Some of the major radionuclides used are I-131, Tc-99, Co-60, Ir-192, and Cs-137. These are rarely released into the environment.^[quantify] The public also is exposed to radiation from consumer products, such as tobacco (polonium-210), building materials, combustible fuels (gas, coal, etc.), ophthalmic glass^{[citation needed]}, televisions, luminous watches and dials (tritium), airport X-ray systems, smoke detectors (americium), road construction materials,^{[citation needed]} electron tubes, fluorescent lamp starters,^{[citation needed]} and lantern mantles (thorium). A typical dose for radiation therapy might be 7 Gy spread daily (on weekdays) over two months^{[citation needed]}.

Of lesser magnitude, members of the public are exposed to radiation from the nuclear fuel cycle, which includes the entire sequence from mining and milling of uranium to the disposal of the spent fuel, as well as the coal power cycle due to the release and emission of radioactive contaminants that were trapped in the coal. The effects of such exposure have not been reliably measured due to the extremely low doses involved. Estimates of exposure are low enough that proponents of nuclear power liken them to the mutagenic power of wearing trousers for two extra minutes per year (because heat causes mutation).^{[citation needed]} Opponents use a cancer per dose model to assert that such activities cause several hundred cases of cancer per year, an application of the widely accepted Linear no-threshold model (LNT).

In a nuclear war, gamma rays from fallout of nuclear weapons would probably cause the largest number of casualties.^{[citation needed]} Immediately downwind of targets, doses would exceed 300 Gy per hour.^{[citation needed]} As a reference, 4.5 Gy (around 15,000 times the average annual background rate) is fatal to half of a normal population, without medical treatment.

Some of the radionuclides of concern include cobalt-60, caesium-137, americium-241, and iodine-131.

Spaceflight

During human spaceflights, in particular flights beyond low Earth orbit, astronauts are exposed to both galactic cosmic radiation (GCR) and possibly solar particle event (SPE) radiation. Evidence indicates past SPE radiation levels that would have been lethal for unprotected astronauts.^[26] GCR levels that might lead to acute radiation poisoning are not as well-understood.^[27]

Air travel

Air travel exposes people on aircraft to increased radiation from space as compared to sea level, including cosmic rays and from solar flare events.^[28] Software programs such as Epcard, CARI, SIEVERT, PCAIRE are attempts to simulate exposure by aircrews and passengers.^[28] An example of a measured dose (not simulated dose) is 6 μSv per hour from London Heathrow to Tokyo Narita on a high-latitude polar route.^[28] However, dosages can vary, such as during periods of high solar activity.^[28] The United States FAA requires airlines to provide flight crew with information about cosmic radiation, and an ICRP recommendation for the general public is no more than 1 mSv per year.^[28] In addition, many airlines do not allow pregnant flightcrew members, to comply with an European Directive.^[28] The FAA has a recommended limit of 1 mSv total for a pregnancy, and no more than 0.5 mSv per month.^[28] Information originally based on Fundamentals of Aerospace Medicine published in 2008.^[28]

Limiting exposure

There are three standard ways to limit exposure:

1. Time: For people who are exposed to radiation in addition to natural background radiation, limiting or minimizing the exposure time will reduce the dose from the radiation source.
2. Distance: Radiation intensity decreases sharply with distance, according to an inverse-square law (in an absolute vacuum).^[29]
3. Shielding: Air or skin can be sufficient to substantially attenuate low-energy alpha and beta radiation. Barriers of lead, concrete, or water give effective protection from more energetic particles such as gamma rays and neutrons. Some radioactive materials are stored or handled underwater or by remote control in rooms constructed of thick concrete or lined with lead. There are special plastic shields that stop beta particles, and air will stop most alpha particles. The effectiveness of a material in shielding radiation is determined by its half-value thicknesses, the thickness of material that reduces the radiation by half. This value is a function of the material itself and of the type and energy of ionizing radiation. Some generally accepted thicknesses of attenuating material are 5 mm of aluminum for most beta particles, and 3 inches of lead for gamma radiation.

Containment is a combination of shielding and distance: Radioactive materials are confined in the smallest possible space and kept out of the environment. Radioactive isotopes for medical use, for example, are dispensed in closed handling facilities, while nuclear reactors operate within closed systems with multiple barriers that keep the radioactive materials contained. Rooms have a reduced air pressure so that any leaks occur into the room and not out of it. An example of containment is an effective fallout shelter, which in a nuclear war, reduces human exposure at least 1,000 times.

Other civil defense measures can help reduce exposure of populations by reducing ingestion of isotopes and occupational exposure during war time and nuclear reactor accidents. One available measure is the use of potassium iodide (KI) tablets, which effectively blocks the uptake of radioactive iodine (one of the major radioisotope products of nuclear fission) into the human thyroid gland.

See also

• Hormesis
• Ionometer
• Irradiated mail
• National Council on Radiation Protection and Measurements
• Nuclear safety
• Nuclear semiotics
• Radiant energy
• Radiation protection
• Radiation protection of patients
• Radiation Protection Convention, 1960
• Treatment of infections after accidental or hostile exposure to ionizing radiation

References

External links

• The Nuclear Regulatory Commission regulates most commercial radiation sources and non-medical exposures in the US:
• NLM Hazardous Substances Databank – Ionizing Radiation
• United Nations Scientific Committee on the Effects of Atomic Radiation 2000 Report Volume 1: Sources, Volume 2: Effects
• Beginners Guide to Ionising Radiation Measurement
• Radiation Risk Calculator Calculate cancer risk from CT scans and xrays.
• Free Radiation Safety Course
• Health Physics Society Public Education Website
• Oak Ridge Reservation Basic Radiation Facts