Yes. If you are building a web site with any level of interactivity(forms / users / databases), youwill want to use a framework to make handling requestsand responses easier.

If there is no interactivity then you may still wantto look at using something like Template Toolkitor Plack::Middleware::TemplateToolkitso maintenance of your HTML files (and other assets) is easier.

Which web framework should I use?

There is no simple answer to this question. Perl frameworks can run everythingfrom basic file servers and small scale intranets to massive multinationalmultilingual websites that are the core to international businesses.

Below is a list of a few frameworks with comments which might help you in making a decision, depending on your specific requirements. Start by readingthe docs, then ask questions on the relevant mailing list or IRC channel.

Catalyst
Strongly object-oriented and fully-featured with a long development history anda large community and addon ecosystem. It is excellent for large and complexapplications, where you have full control over the server.
Dancer
Young and free of legacy weight, providing a lightweight and easy to learn API.Has a growing addon ecosystem. It is best used for smaller projects andvery easy to learn for beginners.
Mojolicious
Fairly young with a focus on HTML5 and real-time web technologies such asWebSockets.
Web::Simple
Currently experimental, strongly object-oriented, built for speed and intendedas a toolkit for building micro web apps, custom frameworks or for tieingtogether existing Plack-compatible web applications with one central dispatcher.

All of these interact with or use Plack which is worth understandingthe basics of when building a website in Perl (there is a lot of usefulPlack::Middleware).

What is Plack and PSGI?

PSGI is the Perl Web Server Gateway Interface Specification, it isa standard that many Perl web frameworks use, you should not need tounderstand it to build a web site, the part you might want to use is Plack.

Plack is a set of tools for using the PSGI stack. It containsmiddlewarecomponents, a reference server and utilities for Web application frameworks.Plack is like Ruby's Rack or Python's Paste for WSGI.

You could build a web site using Plack and your own code,but for anything other than a very basic web site, using a web framework(that uses Plack) is a better option.

How do I remove HTML from a string?

Use HTML::Strip, or HTML::FormatText which not only removes HTMLbut also attempts to do a little simple formatting of the resultingplain text.

How do I extract URLs?

HTML::SimpleLinkExtor will extract URLs from HTML, it handles anchors,images, objects, frames, and many other tags that can contain a URL.If you need anything more complex, you can create your own subclass ofHTML::LinkExtor or HTML::Parser. You might even useHTML::SimpleLinkExtor as an example for something specificallysuited to your needs.

You can use URI::Find to extract URLs from an arbitrary text document.

How do I fetch an HTML file?

(contributed by brian d foy)

Use the libwww-perl distribution. The LWP::Simple module can fetch webresources and give their content back to you as a string:

 use LWP::Simple qw(get);
 
  my $html = get( "http://www.example.com/index.html" );

It can also store the resource directly in a file:

 use LWP::Simple qw(getstore);
 
  getstore( "http://www.example.com/index.html", "foo.html" );

If you need to do something more complicated, you can useLWP::UserAgent module to create your own user-agent (e.g. browser)to get the job done. If you want to simulate an interactive webbrowser, you can use the WWW::Mechanize module.

How do I automate an HTML form submission?

If you are doing something complex, such as moving through many pagesand forms or a web site, you can use WWW::Mechanize. See itsdocumentation for all the details.

If you're submitting values using the GET method, create a URL and encodethe form using the query_form method:

 use LWP::Simple;
  use URI::URL;
 
  my $url = url('L<http://www.perl.com/cgi-bin/cpan_mod')>;
  $url->query_form(module => 'DB_File', readme => 1);
  $content = get($url);

If you're using the POST method, create your own user agent and encodethe content appropriately.

 use HTTP::Request::Common qw(POST);
  use LWP::UserAgent;
 
  my $ua = LWP::UserAgent->new();
  my $req = POST 'L<http://www.perl.com/cgi-bin/cpan_mod'>,
    [ module => 'DB_File', readme => 1 ];
  my $content = $ua->request($req)->as_string;

How do I decode or create those %-encodings on the web?

Most of the time you should not need to do this asyour web framework, or if you are making a request,the LWP or other module would handle it for you.

To encode a string yourself, use the URI::Escape module. The uri_escapefunction returns the escaped string:

 my $original = "Colon : Hash # Percent %";
 
  my $escaped = uri_escape( $original );
 
  print "$escaped\n"; # 'Colon%20%3A%20Hash%20%23%20Percent%20%25'

To decode the string, use the uri_unescape function:

 my $unescaped = uri_unescape( $escaped );
 
  print $unescaped; # back to original

Remember not to encode a full URI, you need to escape eachcomponent separately and then join them together.

How do I redirect to another page?

Most Perl Web Frameworks will have a mechanism for doing this,using the Catalyst framework it would be:

 $c->res->redirect($url);
  $c->detach();

If you are using Plack (which most frameworks do), thenPlack::Middleware::Rewrite is worth looking at if youare migrating from Apache or have URL's you want to alwaysredirect.

How do I put a password on my web pages?

See if the web framework you are using has anauthentication system and if that fits your needs.

Alternativly look at Plack::Middleware::Auth::Basic,or one of the other Plack authenticationoptions.

How do I make sure users can't enter values into a form that causes my CGI script to do bad things?

(contributed by brian d foy)

You can't prevent people from sending your script bad data. Even ifyou add some client-side checks, people may disable them or bypassthem completely. For instance, someone might use a module such asLWP to submit to your web site. If you want to prevent data thattry to use SQL injection or other sorts of attacks (and you shouldwant to), you have to not trust any data that enter your program.

The perlsec documentation has general advice about data security.If you are using the DBI module, use placeholder to fill in data.If you are running external programs with system or exec, usethe list forms. There are many other precautions that you should take,too many to list here, and most of them fall under the category of notusing any data that you don't intend to use. Trust no one.

How do I parse a mail header?

Use the Email::MIME module. It's well-tested and supports all thecraziness that you'll see in the real world (comment-folding whitespace,encodings, comments, etc.).

  use Email::MIME;
 
   my $message = Email::MIME->new($rfc2822);
   my $subject = $message->header('Subject');
   my $from = $message->header('From');

If you've already got some other kind of email object, consider passingit to Email::Abstract and then using its cast method to get anEmail::MIME object:

  my $mail_message_object = read_message();
   my $abstract = Email::Abstract->new($mail_message_object);
   my $email_mime_object = $abstract->cast('Email::MIME');

How do I check a valid mail address?

(partly contributed by Aaron Sherman)

This isn't as simple a question as it sounds. There are two parts:

a) How do I verify that an email address is correctly formatted?

b) How do I verify that an email address targets a valid recipient?

Without sending mail to the address and seeing whether there's a humanon the other end to answer you, you cannot fully answer part b, butthe Email::Valid module will do both part a and part b as faras you can in real-time.

Our best advice for verifying a person's mail address is to have thementer their address twice, just as you normally do to change apassword. This usually weeds out typos. If both versions match, sendmail to that address with a personal message. If you get the messageback and they've followed your directions, you can be reasonablyassured that it's real.

A related strategy that's less open to forgery is to give them a PIN(personal ID number). Record the address and PIN (best that it be arandom one) for later processing. In the mail you send, include a link toyour site with the PIN included. If the mail bounces, you know it's notvalid. If they don't click on the link, either they forged the address or(assuming they got the message) following through wasn't important so youdon't need to worry about it.

How do I decode a MIME/BASE64 string?

The MIME::Base64 package handles this as well as the MIME/QP encoding.Decoding base 64 becomes as simple as:

 use MIME::Base64;
  my $decoded = decode_base64($encoded);

The Email::MIME module can decode base 64-encoded email message partstransparently so the developer doesn't need to worry about it.

How do I find the user's mail address?

Ask them for it. There are so many email providers available that it'sunlikely the local system has any idea how to determine a user's email address.

The exception is for organization-specific email (e.g. [email protected])where policy can be codified in your program. In that case, you could look at$ENV{USER}, $ENV{LOGNAME}, and getpwuid($<) in scalar context, like so:

  my $user_name = getpwuid($<)

But you still cannot make assumptions about whether this is correct, unlessyour policy says it is. You really are best off asking the user.

How do I send email?

Use the Email::MIME and Email::Sender::Simple modules, like so:

  # first, create your message
   my $message = Email::MIME->create(
  header_str => [
   From => '[email protected]',
   To  => '[email protected]',
   Subject => 'Happy birthday!',
  ],
  attributes => {
   encoding => 'quoted-printable',
   charset  => 'ISO-8859-1',
  },
  body_str => "Happy birthday to you!\n",
   );
 
   use Email::Sender::Simple qw(sendmail);
   sendmail($message);

By default, Email::Sender::Simple will try `sendmail` first, if it existsin your $PATH. This generally isn't the case. If there's a remote mailserver you use to send mail, consider investigating one of the Transportclasses. At time of writing, the available transports include:

Email::Sender::Transport::Sendmail
This is the default. If you can use the mail(1) or mailx(1)program to send mail from the machine where your code runs, you shouldbe able to use this.
Email::Sender::Transport::SMTP
This transport contacts a remote SMTP server over TCP. It optionallyuses SSL and can authenticate to the server via SASL.
Email::Sender::Transport::SMTP::TLS
This is like the SMTP transport, but uses TLS security. You canauthenticate with this module as well, using any mechanisms your serversupports after STARTTLS.

Telling Email::Sender::Simple to use your transport is straightforward.

  sendmail(
  $message,
  {
   transport => $email_sender_transport_object,
  }
   );

How do I use MIME to make an attachment to a mail message?

Email::MIME directly supports multipart messages. Email::MIMEobjects themselves are parts and can be attached to other Email::MIMEobjects. Consult the Email::MIME documentation for more information,including all of the supported methods and examples of their use.

How do I read email?

Use the Email::Folder module, like so:

  use Email::Folder;
 
   my $folder = Email::Folder->new('/path/to/email/folder');
   while(my $message = $folder->next_message) {
  # next_message returns Email::Simple objects, but we want
  # Email::MIME objects as they're more robust
  my $mime = Email::MIME->new($message->as_string);
   }

There are different classes in the Email::Folder namespace forsupporting various mailbox types. Note that these modules are generallyrather limited and only support reading rather than writing.

How do I find out my hostname, domainname, or IP address?

(contributed by brian d foy)

The Net::Domain module, which is part of the Standard Library startingin Perl 5.7.3, can get you the fully qualified domain name (FQDN), the hostname, or the domain name.

 use Net::Domain qw(hostname hostfqdn hostdomain);
 
  my $host = hostfqdn();

The Sys::Hostname module, part of the Standard Library, can also get thehostname:

 use Sys::Hostname;
 
  $host = hostname();

The Sys::Hostname::Long module takes a different approach and triesharder to return the fully qualified hostname:

  use Sys::Hostname::Long 'hostname_long';
 
   my $hostname = hostname_long();

To get the IP address, you can use the gethostbyname built-in functionto turn the name into a number. To turn that number into the dotted octetform (a.b.c.d) that most people expect, use the inet_ntoa functionfrom the Socket module, which also comes with perl.

 use Socket;
 
  my $address = inet_ntoa(
  scalar gethostbyname( $host || 'localhost' )
  );

How do I fetch/put an (S)FTP file?

Net::FTP, and Net::SFTP allow you to interact with FTP and SFTP (SecureFTP) servers.

How can I do RPC in Perl?

Use one of the RPC modules( https://metacpan.org/search?q=RPC ).

AUTHOR AND COPYRIGHT

This documentation is free; you can redistribute it and/or modify itunder the same terms as Perl itself.

Irrespective of its distribution, all code examples in this fileare hereby placed into the public domain. You are permitted andencouraged to use this code in your own programs for funor for profit as you see fit. A simple comment in the code givingcredit would be courteous but is not required.

Page index

NAME
DESCRIPTION
AUTHOR AND COPYRIGHT

Source : perldoc.perl.org - Official documentation for the Perl programming language
Site maintained by Jon Allen (JJ) See the project page for more details
Documentation maintained by the Perl 5 Porters

(Sebelumnya) System Interaction

Perl Unicode FAQ (Berikutnya)

Link Bermanfaat

✺ Kuliah Online ✺ Kode Pos ✺ Kuliah Umum ✺ Kuliah Kelas Ekstensi ✺ Kuliah Jarak Jauh ✺ Kuliah Gratis Beasiswa S1 S2 ✺ Kampus Merdeka Belajar

eduNitas • Konsultan Pendidikan Tinggi (KPT) • PT. Gilland Ganesha • Gilland Group