| 16.5. File and Archiving CommandsArchiving - tar
The standard UNIX archiving utility. Originally a Tape ARchiving program, it has developed into a general purpose package that can handle all manner of archiving with all types of destination devices, ranging from tape drives to regular files to even stdout (see Example 3-4). GNU tar has been patched to accept various compression filters, for example: tar czvf archive_name.tar.gz *, which recursively archives and gzips all files in a directory tree except dotfiles in the current working directory ($PWD). Some useful tar options: -c create (a new archive) -x extract (files from existing archive) --delete delete (files from existing archive) | | This option will not work on magnetic tape devices. | -r append (files to existing archive) -A append (tar files to existing archive) -t list (contents of existing archive) -u update archive -d compare archive with specified filesystem --after-date only process files with a date stamp after specified date -z gzip the archive (compress or uncompress, depending on whethercombined with the -c or-x) option -j bzip2 the archive | | It may be difficult to recover data from a corrupted gzipped tar archive. When archiving important files, make multiple backups. | - shar
Shell archiving utility. The text files in a shell archive are concatenated without compression, and the resultant archive is essentially a shell script, complete with #!/bin/sh header, containing all the necessary unarchiving commands, as well as the files themselves. Shar archives still show up in Usenet newsgroups, but otherwise shar has been replaced by tar/gzip. The unshar command unpacks shar archives. The mailshar command is a Bash script that uses shar to concatenate multiple files into a single one for e-mailing. This script supports compression and uuencoding. - ar
Creation and manipulation utility for archives, mainly used for binary object file libraries. - rpm
The Red Hat Package Manager, or rpm utility provides a wrapper for source or binary archives. It includes commands for installing and checking the integrity of packages, among other things. A simple rpm -i package_name.rpm usually suffices to install a package, though there are many more options available. | | rpm -qf identifies which package a file originates from. bash$ rpm -qf /bin/lscoreutils-5.2.1-31 | | | | rpm -qa gives a complete list of all installed rpm packages on a given system. An rpm -qa package_name lists only the package(s) corresponding to package_name. bash$ rpm -qaredhat-logos-1.1.3-1 glibc-2.2.4-13 cracklib-2.7-12 dosfstools-2.7-1 gdbm-1.8.0-10 ksymoops-2.4.1-1 mktemp-1.5-11 perl-5.6.0-17 reiserfs-utils-3.x.0j-2 ...bash$ rpm -qa docbook-utilsdocbook-utils-0.6.9-2bash$ rpm -qa docbook | grep docbookdocbook-dtd31-sgml-1.0-10 docbook-style-dsssl-1.64-3 docbook-dtd30-sgml-1.0-10 docbook-dtd40-sgml-1.0-11 docbook-utils-pdf-0.6.9-2 docbook-dtd41-sgml-1.0-10 docbook-utils-0.6.9-2 | | - cpio
This specialized archiving copy command (copy input and output) is rarely seen any more, having been supplanted by tar/gzip. It still has its uses, such as moving a directory tree. With an appropriate block size (for copying) specified, it can be appreciably faster than tar. Example 16-30. Using cpio to move a directory tree #!/bin/bash# Copying a directory tree using cpio.# Advantages of using 'cpio':# Speed of copying. It's faster than 'tar' with pipes.# Well suited for copying special files (named pipes, etc.)#+ that 'cp' may choke on.ARGS=2E_BADARGS=65if [ $# -ne "$ARGS" ]then echo "Usage: `basename $0` source destination" exit $E_BADARGSfi source="$1" destination="$2" ###################################################################find "$source" -depth | cpio -admvp "$destination" # ^^^^^ ^^^^^# Read the 'find' and 'cpio' info pages to decipher these options.# The above works only relative to $PWD (current directory) . . .#+ full pathnames are specified.#################################################################### Exercise:# --------# Add code to check the exit status ($?) of the 'find | cpio' pipe#+ and output appropriate error messages if anything went wrong.exit $? | - rpm2cpio
This command extracts a cpio archive from an rpm one. Example 16-31. Unpacking an rpm archive #!/bin/bash# de-rpm.sh: Unpack an 'rpm' archive: ${1?"Usage: `basename $0` target-file"}# Must specify 'rpm' archive name as an argument.TEMPFILE=$$.cpio # Tempfile with "unique" name. # $$ is process ID of script.rpm2cpio < $1 > $TEMPFILE # Converts rpm archive into #+ cpio archive.cpio --make-directories -F $TEMPFILE -i # Unpacks cpio archive.rm -f $TEMPFILE # Deletes cpio archive.exit 0# Exercise:# Add check for whether 1) "target-file" exists and#+ 2) it is an rpm archive.# Hint: Parse output of 'file' command. | - pax
The pax portable archive exchange toolkit facilitates periodic file backups and is designed to be cross-compatible between various flavors of UNIX. It was designed to replace tar and cpio. pax -wf daily_backup.pax ~/linux-server/files # Creates a tar archive of all files in the target directory.# Note that the options to pax must be in the correct order --#+ pax -fw has an entirely different effect.pax -f daily_backup.pax# Lists the files in the archive.pax -rf daily_backup.pax ~/bsd-server/files# Restores the backed-up files from the Linux machine#+ onto a BSD one. | Note that pax handles many of the standard archiving and compression commands.
Compression - gzip
The standard GNU/UNIX compression utility, replacing the inferior and proprietary compress. The corresponding decompression command is gunzip, which is the equivalent of gzip -d. | | The -c option sends the output of gzip to stdout. This is useful when piping to other commands. |
The zcat filter decompresses a gzipped file to stdout, as possible input to a pipe or redirection. This is, in effect, a cat command that works on compressed files (including files processed with the older compress utility). The zcat command is equivalent to gzip -dc. | | On some commercial UNIX systems, zcat is a synonym for uncompress -c, and will not work on gzipped files. | See also Example 7-7. - bzip2
An alternate compression utility, usually more efficient (but slower) than gzip, especially on large files. The corresponding decompression command is bunzip2. Similar to the zcat command, bzcat decompresses a bzipped2-ed file to stdout. | | Newer versions of tar have been patched with bzip2 support. | - compress, uncompress
This is an older, proprietary compression utility found in commercial UNIX distributions. The more efficient gzip has largely replaced it. Linux distributions generally include a compress workalike for compatibility, although gunzip can unarchive files treated with compress. | | The znew command transforms compressed files into gzipped ones. | - sq
Yet another compression (squeeze) utility, a filter that works only on sorted ASCII word lists. It uses the standard invocation syntax for a filter, sq < input-file > output-file. Fast, but not nearly as efficient as gzip. The corresponding uncompression filter is unsq, invoked like sq. | | The output of sq may be piped to gzip for furthercompression. | - zip, unzip
Cross-platform file archiving and compression utility compatible with DOS pkzip.exe. "Zipped" archives seem to be a more common medium of file exchange on the Internet than "tarballs." - unarc, unarj, unrar
These Linux utilities permit unpacking archives compressed with the DOS arc.exe, arj.exe, and rar.exe programs. - lzma, unlzma, lzcat
Highly efficient Lempel-Ziv-Markov compression. The syntax of lzma is similar to that of gzip. The 7-zip Website has more information.
File Information - file
A utility for identifying file types. The command file file-name will return a file specification for file-name, such as ascii text or data. It references the magic numbers found in /usr/share/magic, /etc/magic, or /usr/lib/magic, depending on the Linux/UNIX distribution. The -f option causes file to run in batch mode, to read from a designated file a list of filenames to analyze. The -z option, when used on a compressed target file, forces an attempt to analyze the uncompressed file type. bash$ file test.tar.gztest.tar.gz: gzip compressed data, deflated, last modified: Sun Sep 16 13:34:51 2001, os: Unixbash file -z test.tar.gztest.tar.gz: GNU tar archive (gzip compressed data, deflated, last modified: Sun Sep 16 13:34:51 2001, os: Unix) | # Find sh and Bash scripts in a given directory:DIRECTORY=/usr/local/binKEYWORD=Bourne# Bourne and Bourne-Again shell scriptsfile $DIRECTORY/* | fgrep $KEYWORD# Output:# /usr/local/bin/burn-cd: Bourne-Again shell script text executable# /usr/local/bin/burnit: Bourne-Again shell script text executable# /usr/local/bin/cassette.sh: Bourne shell script text executable# /usr/local/bin/copy-cd: Bourne-Again shell script text executable# . . . | Example 16-32. Stripping comments from C program files #!/bin/bash# strip-comment.sh: Strips out the comments (/* COMMENT */) in a C program.E_NOARGS=0E_ARGERROR=66E_WRONG_FILE_TYPE=67if [ $# -eq "$E_NOARGS" ]then echo "Usage: `basename $0` C-program-file" >&2 # Error message to stderr. exit $E_ARGERRORfi # Test for correct file type.type=`file $1 | awk '{ print $2, $3, $4, $5 }'`# "file $1" echoes file type . . .# Then awk removes the first field, the filename . . .# Then the result is fed into the variable "type." correct_type="ASCII C program text" if [ "$type" != "$correct_type" ]then echo echo "This script works on C program files only." echo exit $E_WRONG_FILE_TYPEfi # Rather cryptic sed script:#--------sed '/^/*/d/.**//d' $1#--------# Easy to understand if you take several hours to learn sed fundamentals.# Need to add one more line to the sed script to deal with#+ case where line of code has a comment following it on same line.# This is left as a non-trivial exercise.# Also, the above code deletes non-comment lines with a "*/" . . .#+ not a desirable result.exit 0# ----------------------------------------------------------------# Code below this line will not execute because of 'exit 0' above.# Stephane Chazelas suggests the following alternative:usage() { echo "Usage: `basename $0` C-program-file" >&2 exit 1}WEIRD=`echo -n -e '377'` # or WEIRD=$'377'[[ $# -eq 1 ]] || usagecase `file "$1"` in *"C program text"*) sed -e "s%/*%${WEIRD}%g;s%*/%${WEIRD}%g" "$1" | tr '377' '377' | sed -ne 'p;n' | tr -d '' | tr '377' '' *) usage;esac# This is still fooled by things like:# printf("/*");# or# /* /* buggy embedded comment */## To handle all special cases (comments in strings, comments in string#+ where there is a ", " ...),#+ the only way is to write a C parser (using lex or yacc perhaps?).exit 0 | - which
which command gives the full path to "command." This is useful for finding out whether a particular command or utility is installed on the system. $bash which rm For an interesting use of this command, see Example 36-14. - whereis
Similar to which, above, whereis command gives the full path to "command," but also to its manpage. $bash whereis rm rm: /bin/rm /usr/share/man/man1/rm.1.bz2 | - whatis
whatis command looks up "command" in the whatis database. This is useful for identifying system commands and important configuration files. Consider it a simplified man command. $bash whatis whatis whatis (1) - search the whatis database for complete words | Example 16-33. Exploring /usr/X11R6/bin #!/bin/bash# What are all those mysterious binaries in /usr/X11R6/bin?DIRECTORY="/usr/X11R6/bin" # Try also "/bin", "/usr/bin", "/usr/local/bin", etc.for file in $DIRECTORY/*do whatis `basename $file` # Echoes info about the binary.doneexit 0# Note: For this to work, you must create a "whatis" database#+ with /usr/sbin/makewhatis.# You may wish to redirect output of this script, like so:# ./what.sh >>whatis.db# or view it a page at a time on stdout,# ./what.sh | less | See also Example 11-3. - vdir
Show a detailed directory listing. The effect is similar to ls -lb. This is one of the GNU fileutils. bash$ vdirtotal 10 -rw-r--r-- 1 bozo bozo 4034 Jul 18 22:04 data1.xrolo -rw-r--r-- 1 bozo bozo 4602 May 25 13:58 data1.xrolo.bak -rw-r--r-- 1 bozo bozo 877 Dec 17 2000 employment.xrolobash ls -ltotal 10 -rw-r--r-- 1 bozo bozo 4034 Jul 18 22:04 data1.xrolo -rw-r--r-- 1 bozo bozo 4602 May 25 13:58 data1.xrolo.bak -rw-r--r-- 1 bozo bozo 877 Dec 17 2000 employment.xrolo | - locate, slocate
The locate command searches for files using a database stored for just that purpose. The slocate command is the secure version of locate (which may be aliased to slocate). $bash locate hickson /usr/lib/xephem/catalogs/hickson.edb | - getfacl, setfacl
These commands retrieve or set the file access control list -- the owner, group, and file permissions. bash$ getfacl *# file: test1.txt # owner: bozo # group: bozgrp user::rw- group::rw- other::r-- # file: test2.txt # owner: bozo # group: bozgrp user::rw- group::rw- other::r-- bash$ setfacl -m u:bozo:rw yearly_budget.csvbash$ getfacl yearly_budget.csv# file: yearly_budget.csv # owner: accountant # group: budgetgrp user::rw- user:bozo:rw- user:accountant:rw- group::rw- mask::rw- other::r-- | - readlink
Disclose the file that a symbolic link points to. bash$ readlink /usr/bin/awk../../bin/gawk | - strings
Use the strings command to find printable strings in a binary or data file. It will list sequences of printable characters found in the target file. This might be handy for a quick 'n dirty examination of a core dump or for looking at an unknown graphic image file (strings image-file | more might show something like JFIF, which would identify the file as a jpeg graphic). In a script, you would probably parse the output of strings with grep or sed. See Example 11-7 and Example 11-9. Example 16-34. An "improved" strings command #!/bin/bash# wstrings.sh: "word-strings" (enhanced "strings" command)## This script filters the output of "strings" by checking it#+ against a standard word list file.# This effectively eliminates gibberish and noise,#+ and outputs only recognized words.# ===========================================================# Standard Check for Script Argument(s)ARGS=1E_BADARGS=85E_NOFILE=86if [ $# -ne $ARGS ]then echo "Usage: `basename $0` filename" exit $E_BADARGSfiif [ ! -f "$1" ] # Check if file exists.then echo "File "$1" does not exist." exit $E_NOFILEfi# ===========================================================MINSTRLEN=3 # Minimum string length.WORDFILE=/usr/share/dict/linux.words # Dictionary file.# May specify a different word list file#+ of one-word-per-line format.# For example, the "yawl" word-list package,# http://bash.deta.in/yawl-0.3.2.tar.gzwlist=`strings "$1" | tr A-Z a-z | tr '[:space:]' Z | tr -cs '[:alpha:]' Z | tr -s '173-377' Z | tr Z ' '`# Translate output of 'strings' command with multiple passes of 'tr'.# "tr A-Z a-z" converts to lowercase.# "tr '[:space:]'" converts whitespace characters to Z's.# "tr -cs '[:alpha:]' Z" converts non-alphabetic characters to Z's,#+ and squeezes multiple consecutive Z's.# "tr -s '173-377' Z" converts all characters past 'z' to Z's#+ and squeezes multiple consecutive Z's,#+ which gets rid of all the weird characters that the previous#+ translation failed to deal with.# Finally, "tr Z ' '" converts all those Z's to whitespace,#+ which will be seen as word separators in the loop below.# ***********************************************************************# Note the technique of feeding/piping the output of 'tr' back to itself,#+ but with different arguments and/or options on each successive pass.# ***********************************************************************for word in $wlist # Important: # $wlist must not be quoted here. # "$wlist" does not work. # Why not?do strlen=${#word} # String length. if [ "$strlen" -lt "$MINSTRLEN" ] # Skip over short strings. then continue fi grep -Fw $word "$WORDFILE" # Match whole words only.# ^^^ # "Fixed strings" and #+ "whole words" options. done exit $? |
Comparison - diff, patch
diff: flexible file comparison utility. It compares the target files line-by-line sequentially. In some applications, such as comparing word dictionaries, it may be helpful to filter the files through sort and uniq before piping them to diff. diff file-1 file-2 outputs the lines in the files that differ, with carets showing which file each particular line belongs to. The --side-by-side option to diff outputs each compared file, line by line, in separate columns, with non-matching lines marked. The -c and -u options likewise make the output of the command easier to interpret. There are available various fancy frontends for diff, such as sdiff, wdiff, xdiff, and mgdiff. | | The diff command returns an exit status of 0 if the compared files are identical, and 1 if they differ. This permits use of diff in a test construct within a shell script (see below). | A common use for diff is generating difference files to be used with patch The -e option outputs files suitable for ed or ex scripts.
patch: flexible versioning utility. Given a difference file generated by diff, patch can upgrade a previous version of a package to a newer version. It is much more convenient to distribute a relatively small "diff" file than the entire body of a newly revised package. Kernel "patches" have become the preferred method of distributing the frequent releases of the Linux kernel. patch -p1 <patch-file# Takes all the changes listed in 'patch-file'# and applies them to the files referenced therein.# This upgrades to a newer version of the package. | Patching the kernel: cd /usr/srcgzip -cd patchXX.gz | patch -p0# Upgrading kernel source using 'patch'.# From the Linux kernel docs "README",# by anonymous author (Alan Cox?). | | | The diff command can also recursively compare directories (for the filenames present). bash$ diff -r ~/notes1 ~/notes2Only in /home/bozo/notes1: file02 Only in /home/bozo/notes1: file03 Only in /home/bozo/notes2: file04 | | | |
Use zdiff to compare gzipped files. | | |
Use diffstat to create a histogram (point-distribution graph) of output from diff. | - diff3, merge
An extended version of diff that compares three files at a time. This command returns an exit value of 0 upon successful execution, but unfortunately this gives no information about the results of the comparison. bash$ diff3 file-1 file-2 file-3==== 1:1c This is line 1 of "file-1". 2:1c This is line 1 of "file-2". 3:1c This is line 1 of "file-3" | The merge (3-way file merge) command is an interesting adjunct to diff3. Its syntax is merge Mergefile file1 file2. The result is to output to Mergefile the changes that lead from file1 to file2. Consider this command a stripped-down version of patch. - sdiff
Compare and/or edit two files in order to merge them into an output file. Because of its interactive nature, this command would find little use in a script. - cmp
The cmp command is a simpler version of diff, above. Whereas diff reports the differences between two files, cmp merely shows at what point they differ. | | Like diff, cmp returns an exit status of 0 if the compared files are identical, and 1 if they differ. This permits use in a test construct within a shell script. | Example 16-35. Using cmp to compare two files within a script. #!/bin/bash# file-comparison.shARGS=2 # Two args to script expected.E_BADARGS=85E_UNREADABLE=86if [ $# -ne "$ARGS" ]then echo "Usage: `basename $0` file1 file2" exit $E_BADARGSfiif [[ ! -r "$1" || ! -r "$2" ]]then echo "Both files to be compared must exist and be readable." exit $E_UNREADABLEficmp $1 $2 &> /dev/null# Redirection to /dev/null buries the output of the "cmp" command.# cmp -s $1 $2 has same result ("-s" silent flag to "cmp")# Thank you Anders Gustavsson for pointing this out.## Also works with 'diff', i.e.,#+ diff $1 $2 &> /dev/nullif [ $? -eq 0 ] # Test exit status of "cmp" command.then echo "File "$1" is identical to file "$2"." else echo "File "$1" differs from file "$2"." fiexit 0 | | | Use zcmp on gzipped files. | - comm
Versatile file comparison utility. The files must be sorted for this to be useful. comm-optionsfirst-filesecond-file comm file-1 file-2 outputs three columns: column 1 = lines unique to file-1 column 2 = lines unique to file-2 column 3 = lines common to both.
The options allow suppressing output of one or more columns. This command is useful for comparing "dictionaries" or word lists -- sorted text files with one word per line.
Utilities - basename
Strips the path information from a file name, printing only the file name. The construction basename$0 lets the script know its name, that is, the name it was invoked by. This can be used for "usage" messages if, for example a script is called with missing arguments: echo "Usage: `basename $0` arg1 arg2 ... argn" | - dirname
Strips the basename from a filename, printing only the path information. | | basename and dirnamecan operate on any arbitrary string. The argumentdoes not need to refer to an existing file, oreven be a filename for that matter (see Example A-7). | Example 16-36. basename and dirname #!/bin/bashaddress=/home/bozo/daily-journal.txtecho "Basename of /home/bozo/daily-journal.txt = `basename $address`" echo "Dirname of /home/bozo/daily-journal.txt = `dirname $address`" echoecho "My own home is `basename ~/`." # `basename ~` also works.echo "The home of my home is `dirname ~/`." # `dirname ~` also works.exit 0 | - split, csplit
These are utilities for splitting a file into smaller chunks. Their usual use is for splitting up large files in order to back them up on floppies or preparatory to e-mailing or uploading them. The csplit command splits a file according to context, the split occuring where patterns are matched. Example 16-37. A script that copies itself in sections #!/bin/bash# splitcopy.sh# A script that splits itself into chunks,#+ then reassembles the chunks into an exact copy#+ of the original script.CHUNKSIZE=4 # Size of first chunk of split files.OUTPREFIX=xx # csplit prefixes, by default, #+ files with "xx" ...csplit "$0" "$CHUNKSIZE" # Some comment lines for padding . . .# Line 15# Line 16# Line 17# Line 18# Line 19# Line 20cat "$OUTPREFIX"* > "$0.copy" # Concatenate the chunks.rm "$OUTPREFIX"* # Get rid of the chunks.exit $? |
Encoding and Encryption - sum, cksum, md5sum, sha1sum
These are utilities for generating checksums. A checksum is a number mathematically calculated from the contents of a file, for the purpose of checking its integrity. A script might refer to a list of checksums for security purposes, such as ensuring that the contents of key system files have not been altered or corrupted. For security applications, use the md5sum (message digest 5 checksum) command, or better yet, the newer sha1sum (Secure Hash Algorithm). bash$ cksum /boot/vmlinuz1670054224 804083 /boot/vmlinuzbash$ echo -n "Top Secret" | cksum3391003827 10bash$ md5sum /boot/vmlinuz0f43eccea8f09e0a0b2b5cf1dcf333ba /boot/vmlinuzbash$ echo -n "Top Secret" | md5sum8babc97a6f62a4649716f4df8d61728f - | | | The cksum command shows the size, in bytes, of its target, whether file or stdout. The md5sum and sha1sum commands display a dash when they receive their input from stdout. | Example 16-38. Checking file integrity #!/bin/bash# file-integrity.sh: Checking whether files in a given directory# have been tampered with.E_DIR_NOMATCH=80E_BAD_DBFILE=81dbfile=File_record.md5# Filename for storing records (database file).set_up_database (){ echo ""$directory"" > "$dbfile" # Write directory name to first line of file. md5sum "$directory"/* >> "$dbfile" # Append md5 checksums and filenames.}check_database (){ local n=0 local filename local checksum # ------------------------------------------- # # This file check should be unnecessary, #+ but better safe than sorry. if [ ! -r "$dbfile" ] then echo "Unable to read checksum database file!" exit $E_BAD_DBFILE fi # ------------------------------------------- # while read record[n] do directory_checked="${record[0]}" if [ "$directory_checked" != "$directory" ] then echo "Directories do not match up!" # Tried to use file for a different directory. exit $E_DIR_NOMATCH fi if [ "$n" -gt 0 ] # Not directory name. then filename[n]=$( echo ${record[$n]} | awk '{ print $2 }' ) # md5sum writes records backwards, #+ checksum first, then filename. checksum[n]=$( md5sum "${filename[n]}" ) if [ "${record[n]}" = "${checksum[n]}" ] then echo "${filename[n]} unchanged." elif [ "`basename ${filename[n]}`" != "$dbfile" ] # Skip over checksum database file, #+ as it will change with each invocation of script. # --- # This unfortunately means that when running #+ this script on $PWD, tampering with the #+ checksum database file will not be detected. # Exercise: Fix this. then echo "${filename[n]} : CHECKSUM ERROR!" # File has been changed since last checked. fi fi let "n+=1" done <"$dbfile" # Read from checksum database file. } # =================================================== ## main ()if [ -z "$1" ]then directory="$PWD" # If not specified,else #+ use current working directory. directory="$1" fi clear # Clear screen.echo " Running file integrity check on $directory" echo# ------------------------------------------------------------------ # if [ ! -r "$dbfile" ] # Need to create database file? then echo "Setting up database file, ""$directory"/"$dbfile""."; echo set_up_database fi # ------------------------------------------------------------------ #check_database # Do the actual work.echo # You may wish to redirect the stdout of this script to a file,#+ especially if the directory checked has many files in it.exit 0# For a much more thorough file integrity check,#+ consider the "Tripwire" package,#+ http://sourceforge.net/projects/tripwire/. | Also see Example A-19, Example 36-14, and Example 10-2 for creative uses of the md5sum command. | | There have been reports that the 128-bit md5sum can be cracked, so the more secure 160-bit sha1sum is a welcome new addition to the checksum toolkit. bash$ md5sum testfilee181e2c8720c60522c4c4c981108e367 testfilebash$ sha1sum testfile5d7425a9c08a66c3177f1e31286fa40986ffc996 testfile | | Security consultants have demonstrated that even sha1sum can be compromised. Fortunately, newer Linux distros include longer bit-length sha224sum, sha256sum, sha384sum, and sha512sum commands. - uuencode
This utility encodes binary files (images, sound files, compressed files, etc.) into ASCII characters, making them suitable for transmission in the body of an e-mail message or in a newsgroup posting. This is especially useful where MIME (multimedia) encoding is not available. - uudecode
This reverses the encoding, decoding uuencoded files back into the original binaries. Example 16-39. Uudecoding encoded files #!/bin/bash# Uudecodes all uuencoded files in current working directory.lines=35 # Allow 35 lines for the header (very generous).for File in * # Test all the files in $PWD.do search1=`head -n $lines $File | grep begin | wc -w` search2=`tail -n $lines $File | grep end | wc -w` # Uuencoded files have a "begin" near the beginning, #+ and an "end" near the end. if [ "$search1" -gt 0 ] then if [ "$search2" -gt 0 ] then echo "uudecoding - $File -" uudecode $File fi fidone # Note that running this script upon itself fools it#+ into thinking it is a uuencoded file,#+ because it contains both "begin" and "end".# Exercise:# --------# Modify this script to check each file for a newsgroup header,#+ and skip to next if not found.exit 0 | | | The fold -s command may be useful (possibly in a pipe) to process long uudecoded text messages downloaded from Usenet newsgroups. | - mimencode, mmencode
The mimencode and mmencode commands process multimedia-encoded e-mail attachments. Although mail user agents (such as pine or kmail) normally handle this automatically, these particular utilities permit manipulating such attachments manually from the command-line or in batch processing mode by means of a shell script. - crypt
At one time, this was the standard UNIX file encryption utility. Politically-motivated government regulations prohibiting the export of encryption software resulted in the disappearance of crypt from much of the UNIX world, and it is still missing from most Linux distributions. Fortunately, programmers have come up with a number of decent alternatives to it, among them the author's very own cruft (see Example A-4). - openssl
This is an Open Source implementation of Secure Sockets Layer encryption. # To encrypt a file:openssl aes-128-ecb -salt -in file.txt -out file.encrypted -pass pass:my_password# ^^^^^^^^^^^ User-selected password.# aes-128-ecb is the encryption method chosen.# To decrypt an openssl-encrypted file:openssl aes-128-ecb -d -salt -in file.encrypted -out file.txt -pass pass:my_password# ^^^^^^^^^^^ User-selected password. | Piping openssl to/from tar makes it possible to encrypt an entire directory tree. # To encrypt a directory:sourcedir="/home/bozo/testfiles" encrfile="encr-dir.tar.gz" password=my_secret_passwordtar czvf - "$sourcedir" |openssl des3 -salt -out "$encrfile" -pass pass:"$password" # ^^^^ Uses des3 encryption.# Writes encrypted file "encr-dir.tar.gz" in current working directory.# To decrypt the resulting tarball:openssl des3 -d -salt -in "$encrfile" -pass pass:"$password" |tar -xzv# Decrypts and unpacks into current working directory. | Of course, openssl has many other uses, such as obtaining signed certificates for Web sites. See the info page. - shred
Securely erase a file by overwriting it multiple times with random bit patterns before deleting it. This command has the same effect as Example 16-60, but does it in a more thorough and elegant manner. This is one of the GNU fileutils. | | Advanced forensic technology may still be able to recover the contents of a file, even after application of shred. |
Miscellaneous - mktemp
Create a temporary file with a "unique" filename. When invoked from the command-line without additional arguments, it creates a zero-length file in the /tmp directory. bash$ mktemp/tmp/tmp.zzsvql3154 | PREFIX=filenametempfile=`mktemp $PREFIX.XXXXXX`# ^^^^^^ Need at least 6 placeholders#+ in the filename template.# If no filename template supplied,#+ "tmp.XXXXXXXXXX" is the default.echo "tempfile name = $tempfile" # tempfile name = filename.QA2ZpY# or something similar...# Creates a file of that name in the current working directory#+ with 600 file permissions.# A "umask 177" is therefore unnecessary,#+ but it's good programming practice nevertheless. | - make
Utility for building and compiling binary packages. This can also be used for any set of operations triggered by incremental changes in source files. The make command checks a Makefile, a list of file dependencies and operations to be carried out. The make utility is, in effect, a powerful scripting language similar in many ways to Bash, but with the capability of recognizing dependencies. For in-depth coverage of this useful tool set, see the GNU software documentation site. - install
Special purpose file copying command, similar to cp, but capable of setting permissions and attributes of the copied files. This command seems tailormade for installing software packages, and as such it shows up frequently in Makefiles (in the make install : section). It could likewise prove useful in installation scripts. - dos2unix
This utility, written by Benjamin Lin and collaborators, converts DOS-formatted text files (lines terminated by CR-LF) to UNIX format (lines terminated by LF only), and vice-versa. - ptx
The ptx [targetfile] command outputs a permuted index (cross-reference list) of the targetfile. This may be further filtered and formatted in a pipe, if necessary. - more, less
Pagers that display a text file or stream to stdout, one screenful at a time. These may be used to filter the output of stdout . . . or of a script. An interesting application of more is to "test drive" a command sequence, to forestall potentially unpleasant consequences. ls /home/bozo | awk '{print "rm -rf " $1}' | more# ^^^^ # Testing the effect of the following (disastrous) command-line:# ls /home/bozo | awk '{print "rm -rf " $1}' | sh# Hand off to the shell to execute . . . ^^ | The less pager has the interesting property of doing a formatted display of man page source. See Example A-39.
|
| |
